|
[Sponsors] |
Generating structure mesh for 3D micro combustor |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 10, 2019, 12:18 |
Generating structure mesh for 3D micro combustor
|
#1 |
New Member
ali
Join Date: Nov 2018
Posts: 8
Rep Power: 7 |
Hello evrybody
I'm simulating hydrogen combustion using fluent. For generating mesh, I used ICEM but I could not managed to generate structure mesh. Can anybody help me please? Note: The pictures of current generated mesh by me are attached. Picture2.jpg Picture1.jpg |
|
September 26, 2019, 13:30 |
|
#2 |
Member
Arthur
Join Date: Aug 2014
Location: Italy
Posts: 47
Rep Power: 11 |
Since your geometry is relativly complex (not a single cube) you must work in cad and divide your domain in simple subdomains on which it will be possible to create a structured mesh.
The easiest way is to divide your domain in multiple cilinder with a rectangular core. On youtube there are a lot of examples. |
|
Tags |
combustion chamber, icem 19.0, mesh 3d |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sliding mesh problem in CFX | Saima | CFX | 46 | September 11, 2021 08:38 |
[snappyHexMesh] problems generating clean mesh | Christian_tt | OpenFOAM Meshing & Mesh Conversion | 2 | June 20, 2019 06:39 |
Bad elements after generating unstructured volume mesh | max_beetle | Pointwise & Gridgen | 0 | October 24, 2017 02:52 |
3D Hybrid Mesh Errors | DarrenC | ANSYS Meshing & Geometry | 11 | August 5, 2013 07:42 |
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation | tommymoose | ANSYS Meshing & Geometry | 48 | April 15, 2013 05:24 |