CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Special Topics > Mesh Generation & Pre-Processing

SnappyHexMesh on convex surfaces

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 29, 2019, 03:04
Default SnappyHexMesh on convex surfaces
  #1
New Member
 
Kai
Join Date: Feb 2018
Location: Bochum, NRW, Germany
Posts: 24
Rep Power: 4
Kahnbein.Kai is on a distinguished road
Hey Forum,
im trying to build a inflate boundary layer in my CFD model, to calculate the turbulence correctly.



I use SimScale with SnappyHexMesh.


On flat surfaces the infalte boundary layer was created very good and looks proper, but on concave surfaces the layer collaps suddenly, and came back from the surface.


Did you have any experince with concave surfaces with an inflate boundary layer and SnappyHexMesh ?



Here is a screenshot:




Best

regards
Kai
Kahnbein.Kai is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] creating baffles using snappyHexMesh (for given random shaped surfaces) ashish.svm OpenFOAM Meshing & Mesh Conversion 1 January 17, 2018 02:24
[snappyHexMesh] snappyHexMesh for Intersecting surfaces Anamitra OpenFOAM Meshing & Mesh Conversion 0 June 14, 2016 06:38
[snappyHexMesh] MultiRegionMeshing with SnappyHexMesh - SplitMeshRegions doesnt pickup my surfaces Kenneth J. OpenFOAM Meshing & Mesh Conversion 0 January 30, 2015 11:07
[snappyHexMesh] snappyHexMesh not refining surfaces Hydro1004 OpenFOAM Meshing & Mesh Conversion 3 August 29, 2012 12:56
[snappyHexMesh] problemes modelling surfaces with snappyhexmesh gija79 OpenFOAM Meshing & Mesh Conversion 5 June 30, 2010 14:50


All times are GMT -4. The time now is 08:11.