|
[Sponsors] |
gaps in the pre mesh when creating a structured mesh |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 5, 2019, 11:10 |
gaps in the pre mesh when creating a structured mesh
|
#1 |
New Member
Join Date: Dec 2019
Posts: 2
Rep Power: 0 |
Good afternoon guys,
I am trying to create a structured mesh around some semi circles. To do that I split the blocks and associate the edges to the curves (see pictures). When the pre mesh is computed there are some weird gaps in it. Did anyone have a problem like this before?? Thanks in advance Miguel |
|
December 6, 2019, 06:42 |
|
#2 |
Senior Member
Mikko
Join Date: Jul 2014
Location: The Hague, The Netherlands
Posts: 243
Rep Power: 12 |
Hi Miguel,
The connectivity between the blocks is missing because the node distributions are different at the two sides of the edges. The gaps between the blocks result from the different node distributions. Best, Mikko |
|
December 6, 2019, 08:46 |
|
#3 |
New Member
Join Date: Dec 2019
Posts: 2
Rep Power: 0 |
Hi Mikko,
Thanks a lot for your quick answer. I am afraid that the node distribution is the same in both edges (I defined it to be so), but I dont know why thats not the case when displaying the premesh. Best Miguel |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] Unstructured Tetra Mesh around Structured Hexa Mesh | grinser92 | ANSYS Meshing & Geometry | 0 | April 12, 2017 15:05 |
[ICEM] 2D hybrid mesh (unstructured mesh highly dependent on structured mesh parameters) | shubham jain | ANSYS Meshing & Geometry | 1 | April 10, 2017 05:03 |
[ICEM] ICEM Structured Mesh Problem | OMJT | ANSYS Meshing & Geometry | 3 | March 22, 2013 10:06 |
Moving (structured) mesh | Jesper | CFX | 5 | February 2, 2007 03:43 |
unstructured vs. structured grids | Frank Muldoon | Main CFD Forum | 1 | January 5, 1999 10:09 |