CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Special Topics > Mesh Generation & Pre-Processing

Boundary layer with multidomain snappyHexMesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 18, 2019, 07:51
Default Boundary layer with multidomain snappyHexMesh
  #1
New Member
 
Alejandro Valeije
Join Date: Nov 2014
Location: Vigo
Posts: 24
Rep Power: 7
alexvaleije is on a distinguished road
Hello everyone,

I am trying to create a mesh with several domains (one fluid domain and several solid domains) with snappyHexMesh to use it in a chtMultiRegionFoam simulation.

I am capable of doing a correct mesh and run it without any problem, but I am unable to do it with the boundary layer.

In my snappyHexMeshDict, in the Boundary Layer control, I have added the patch name it is supposed to be meshed with that BL, but I think that, after dividing the domains, the control returns that patch as empty, as so it does not create the BL.

Does anybody know how to solve this problem?

Regards,
Alex
alexvaleije is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
My radial inflow turbine Abo Anas CFX 27 May 11, 2018 02:44
Radiation interface hinca CFX 15 January 26, 2014 18:11
Question about heat transfer coefficient setting for CFX Anna Tian CFX 1 June 16, 2013 07:28
An error has occurred in cfx5solve: volo87 CFX 5 June 14, 2013 18:44
[snappyHexMesh] Boundary layer in a pipe Clementhuon OpenFOAM Meshing & Mesh Conversion 6 March 12, 2012 13:41


All times are GMT -4. The time now is 08:56.