 |
 |
 |
|
|
|
[Sponsors] | ||||
May 18, 2020, 13:58
|
Issue with Benchmark case in GMSH
|
#1 |
|
Member
Dr. H.K. Narahari
Join Date: Jan 2019
Posts: 43
Rep Power: 7  |
Hi,
I was trying out the 3D Benchmark related to STEP file input https://gitlab.onelab.info/gmsh/gmsh.../step/wing.geo. That worked fine but when I changed the input STP file to simple wing model and the box size needed for my wing, some issues have cropped-up. When I exported the mesh file in SU2 format the 'Markers' mentioned in the GEO file are not being written. I have attached the GEO file and a GOOGLE Drive link to the STP file (as I cant upload it here). I am unable to figure out the error and any suggestion would be greatly helpful. Thanks in advance Narahari Link for the STP file is : https://drive.google.com/open?id=1ww...mnmqek0a7Ivcul |
|
|
|
|
 |
| Tags |
| gmsh, openvsp, su2 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| benchmark case for validation of turbulent model | ztdep | Main CFD Forum | 1 | December 3, 2019 06:59 |
| Simple channel case using cyclicAMI will not converge | cbcoutinho | OpenFOAM Running, Solving & CFD | 3 | August 4, 2015 12:28 |
| convergence issue for transonic turbulent case | aeroiitkgp | SU2 | 5 | May 12, 2015 16:44 |
| Validation test case issue | Zen | SU2 | 1 | November 21, 2014 08:10 |
| [OpenFOAM] ParaFOAM issue with cavity case | mschoenberg | ParaView | 3 | November 21, 2008 03:57 |
Linear Mode
