 |
 |
 |
|
|
|
[Sponsors] | ||||
HyperMesh 3D Hex Solid Mesh: Node-Node Matching/Mapping |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 21, 2021, 12:42
|
HyperMesh 3D Hex Solid Mesh: Node-Node Matching/Mapping
|
#1 |
|
New Member
Join Date: Apr 2021
Posts: 1
Rep Power: 0  |
Hey everyone,
I've been trying to mesh hex only (quads only) 2 or 3 fluid domains together using HyperMesh. For the 2 fluid domains, I am able to mesh them, but at there interface, the element faces and nodes are not matched, and I need them to be. For the 3 fluid domains, it fails to mesh them together (specifically the larger domain in between them). I am using the solid mapping option. I need to output them for LS-DYNA, any suggestions? |
|
|
|
|
|
| Tags |
| 3d mesh, hex meshing, hypermesh, ls-dyna |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| how to set periodic boundary conditions | Ganesh | FLUENT | 15 | November 18, 2020 06:09 |
| [solids4Foam] How to calculate drag coeff when using solids4Foam | amuzeshi | OpenFOAM CC Toolkits for Fluid-Structure Interaction | 15 | November 7, 2019 12:50 |
| [snappyHexMesh] Snappy Hex Mesh - issue with smoothness of the model edges | olek.warc | OpenFOAM Meshing & Mesh Conversion | 1 | August 31, 2018 11:31 |
| [OpenFOAM] ParaView shows bad cells, checkMesh doesn't seem to notice. | CoolHand | ParaView | 2 | August 21, 2014 15:58 |
| 3D Hybrid Mesh Errors | DarrenC | ANSYS Meshing & Geometry | 11 | August 5, 2013 06:42 |
Linear Mode
