CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Special Topics > Mesh Generation & Pre-Processing

Surface ID in ICEM CFD

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 1, 2021, 11:32
Default Surface ID in ICEM CFD
  #1
New Member
 
RAJDEEP JAGDALE
Join Date: Oct 2018
Posts: 26
Rep Power: 5
RAJDEEP is on a distinguished road
Hi everyone,

i am having doubt in ICEM CFD Meshing. While meshing the geometry, i noticed following messages over console like "possible error(3) in trim curves for surface F_4309(id = 5659)" and "no loop has positive area".

From such messages, i suspect that, the surface F_4309 doesn't has bounding curves. So, my doubts are
1. how can i find this surface in my tin file, I have already named all surfaces, curves, points using create part option in ICEM CFD.
2. What the message "no loop has positive are" means and how to mitigate it?

I also think that, these issue will take more time during meshing. So, any leads/solutions would be highly appreciated.

Thanks in advance.

Regards,
RAJDEEP
RAJDEEP is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
ICEM CFD Swept surface does not follow curves MDN ANSYS 3 December 6, 2020 07:27
OpenFOAM error Vinay Kumar V Main CFD Forum 0 February 20, 2020 10:17
Using ICEM CFD to repair/edit ANSYS Meshing Kaaji1359 ANSYS 2 July 30, 2013 11:28
ICEM CFD 5.0 (Hexa) - Internal Wall/Thin Surface James Date CFX 3 August 10, 2012 05:47
CFX4.3 -build analysis form Chie Min CFX 5 July 13, 2001 00:19


All times are GMT -4. The time now is 02:25.