CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Special Topics > Mesh Generation & Pre-Processing

Regions not meshed, why?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 7, 2022, 12:34
Default Regions not meshed, why?
  #1
New Member
 
Wallison Bezerra
Join Date: Aug 2022
Posts: 1
Rep Power: 0
wallison.silva is on a distinguished road
Hi, guys!

I am working in a project related to short-fibers composites. I have exported the geometry of the composite from another software called "Digimate". So, I opened the file, merged the instances, however, is not generating the mesh in the matrix, in the outside. I must confess that I am not very experienced with the abaqus and that is why I am asking for your help. Does anyone have a clue about what is happening? The software says that maybe I should use Virtual topology, but I do not know what it wrong, in the first place. I know that the geometry is a bit complex, but the fibers are not intersecting each other, for example. In this case, would be much more complex to generate the mesh. Please, I am a bit desperate, haha!



Thank you in advance!

P.S.: First the program was not generating anything, so I have created a new matrix, a little bigger than the previous one, so the fibers has no contact with matrix
Attached Images
File Type: jpg composite.jpg (79.5 KB, 4 views)
wallison.silva is offline   Reply With Quote

Reply

Tags
fail, mesh

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
chtMultiRegionFoam: two fluid regions separated by a thin, conducting wall JayDeeUU OpenFOAM Pre-Processing 16 July 22, 2021 22:17
[snappyHexMesh] multiple regions Tobi OpenFOAM Meshing & Mesh Conversion 56 March 29, 2020 05:53
chtMultiRegionFoam different properties in (fluid) region(s) volker1 OpenFOAM Pre-Processing 3 February 4, 2015 07:46
[snappyHexMesh] Using snappyHexMesh for multiple enclosed regions richard_vega OpenFOAM Meshing & Mesh Conversion 0 November 13, 2014 15:28
Gambit - Some regions not to be meshed ? Atul T. Shinde FLUENT 0 December 20, 2002 00:17


All times are GMT -4. The time now is 07:54.