Home > Forums > Special Topics > Mesh Generation & Pre-Processing

3D thin layer mesh

Updated Threads

Reply

Search this Thread

September 7, 2022, 08:18	3D thin layer mesh	#1
Mashaqi New Member Mohammed Mashaqi Join Date: Jul 2022 Posts: 2 Rep Power: 0	I have a 3D battery solid structure that have a dimension of (127mm x 196mm x 7mm), and I want to enclose this battery structure by a thin cover (0.2mm to 1mm approximately) all around the battery (thin plastic). As I have many batteries, how to do the right mesh? it takes a lot of times for me, as there is several thin solids in between batteries. Can you help me please?

Reply

Tags

battery, meshing 3d, thin cover

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] SnappyHexMesh Internal Mesh problem	tenichols19	OpenFOAM Meshing & Mesh Conversion	2	October 2, 2019 07:39
[snappyHexMesh] snappyHexMesh Boundary Layer at Corner	panpanzhong	OpenFOAM Meshing & Mesh Conversion	5	July 3, 2018 05:53
[snappyHexMesh] Disturbance in the mesh after the addition of layers	Dorian1504	OpenFOAM Meshing & Mesh Conversion	0	June 13, 2017 02:27
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 06:20
errors	Fahad	Main CFD Forum	0	March 23, 2004 13:20

All times are GMT -4. The time now is 03:13.