CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > NUMECA

Capture blunt trailing edge

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By colinda1

Reply
 
LinkBack Thread Tools Display Modes
Old   May 19, 2016, 07:34
Default Capture blunt trailing edge
  #1
New Member
 
Join Date: Apr 2016
Posts: 13
Rep Power: 4
Daniel DA is on a distinguished road
Hi all,

i implemented an impeller with a blunt trailing edge and canīt find an option to capture the edge on a better way than the picture will show you. Do someone have an idea what option for example in, for example in B2B Mesh Topology Control, i can change for a better result?
Thanks for the answers.
Attached Images
File Type: jpg Blunt_trailing_edge_1.jpg (141.1 KB, 41 views)
File Type: jpg Blunt_trailing_edge_2.jpg (109.1 KB, 34 views)
Daniel DA is offline   Reply With Quote

Old   May 23, 2016, 04:30
Default
  #2
Member
 
Colinda
Join Date: May 2012
Posts: 94
Rep Power: 8
colinda1 is on a distinguished road
Dear Daniel,

AutoGrid5 does not recognize the trailing edge as blunt, as the geometry definition is closed at the trailing edge. Try with a new blade definition just containing pressure and suction side but no geometry definition at the trailing edge. This should do the job.
colinda1 is offline   Reply With Quote

Old   May 24, 2016, 13:50
Default
  #3
New Member
 
Join Date: Apr 2016
Posts: 13
Rep Power: 4
Daniel DA is on a distinguished road
Thanks for the answer.
But the Problem is that i only have a blunt trailing edge and no blunt leading edge. So choosing preasure and suction side does not work =(
Daniel DA is offline   Reply With Quote

Old   May 25, 2016, 03:20
Default
  #4
Member
 
Colinda
Join Date: May 2012
Posts: 94
Rep Power: 8
colinda1 is on a distinguished road
Dear Daniel,

That should not be any problem:
the surfaces defining the pressure and suction side can be closed at the leading edge while open at the trailing edge. AutoGrid5 should automatically detect that the leading edge is closed so no blunt topology will be applied. But at the trailing edge it should be open.
Hamidzoka likes this.
colinda1 is offline   Reply With Quote

Old   April 10, 2017, 05:23
Default blunted trainling edge
  #5
New Member
 
Join Date: Apr 2017
Posts: 1
Rep Power: 0
matzen66 is on a distinguished road
Hey,

could you maybe explain how you solved the problem? I am trying the same with a blunt leading edge, but the way with choosing pressure/suction side doesnt work. then there is no stagnation point.

Last edited by matzen66; April 10, 2017 at 07:51.
matzen66 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Blunt Trailing Edge Mesh jasonbot ANSYS Meshing & Geometry 7 February 18, 2015 12:54
how to set periodic boundary conditions Ganesh FLUENT 13 January 22, 2014 05:11
[Workbench] Meshing for NACA0012 with blunt trailing edge nvtrieu ANSYS Meshing & Geometry 0 May 22, 2013 00:09
[DesignModeler] Creating a blunt trailing edge from collapsed leading edge gmd ANSYS Meshing & Geometry 0 March 2, 2012 10:48
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55


All times are GMT -4. The time now is 09:08.