CFView - Pressure distribution along an airfiol

Ko_Shine · October 6, 2018, 08:40

Hello,

Please allow me to ask a simple question. How can I plot a pressure distribution along an airfoil at a specific span location? I created a blade-to-blade surface and plotted a Cartesian plot along the solid but it plotted along the blade. What would I do if I want to plot along an airfoil?

Thank you.

Best regards,
Shine

colinda1 · October 8, 2018, 04:15

Hi Shine,

You can open your solution in the STM view and create a Cartesian plot on a section where the coordinates defining the section reflect the span position at which you want to see the pressure profile (e.g. 0.5 for mid-span).

Ko_Shine · October 8, 2018, 07:55

Hi Colinda,

Thanks a lot for that. I can now plot the pressure distribution.

Many thanks,
Shine

October 6, 2018, 08:40	CFView - Pressure distribution along an airfiol	#1
Ko_Shine Member Ko Shine Join Date: May 2018 Posts: 33 Rep Power: 7	Hello, Please allow me to ask a simple question. How can I plot a pressure distribution along an airfoil at a specific span location? I created a blade-to-blade surface and plotted a Cartesian plot along the solid but it plotted along the blade. What would I do if I want to plot along an airfoil? Thank you. Best regards, Shine

October 8, 2018, 07:55		#3
Ko_Shine Member Ko Shine Join Date: May 2018 Posts: 33 Rep Power: 7	Hi Colinda, Thanks a lot for that. I can now plot the pressure distribution. Many thanks, Shine colinda1 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pisoFOAM (LES) - internal pipe flow - convergence	gu1	OpenFOAM Running, Solving & CFD	0	January 11, 2018 16:39
sonicFoam - pressure driven pipe: flow continuity violation and waveTransmissive BC	Endel	OpenFOAM Running, Solving & CFD	3	September 11, 2014 16:29
Setting up the pressure variation due to tornado in a duct(UDF)+animation	guillaume1990	FLUENT	0	March 3, 2014 11:59
Does star cd takes reference pressure?	monica	Siemens	1	April 19, 2007 11:26
Hydrostatic pressure in 2-phase flow modeling (CFX4.2)	HB &DS	CFX	0	January 9, 2000 13:19

October 8, 2018, 04:15		#2
colinda1 Senior Member Colinda Join Date: May 2012 Location: Brussels Posts: 151 Rep Power: 13	Hi Shine, You can open your solution in the STM view and create a Cartesian plot on a section where the coordinates defining the section reflect the span position at which you want to see the pressure profile (e.g. 0.5 for mid-span).