Export coarse mesh

allenjohngeorge · March 8, 2019, 05:59

I am using AUTOGRID5 to generate mesh for a turbine cascade. I have already generated the fine mesh with Number of grid levels = 3 . I would like the use a coarse mesh for initial calculations and use those solution to initilize the fine mesh. I am able to view the coarse grid upto level 3 in 3D mesh but I am not able to save or export the coarse mesh. Is it possible to do that in AUTOGRID5?

Thank you

colinda1 · March 11, 2019, 03:14

It is for use with FINE™/Turbo or FINE™/Open solver? In that case, you could manage in the solver set-up.

March 8, 2019, 05:59	Export coarse mesh	#1
allenjohngeorge New Member Allen George Join Date: Dec 2013 Posts: 16 Rep Power: 12	I am using AUTOGRID5 to generate mesh for a turbine cascade. I have already generated the fine mesh with Number of grid levels = 3 . I would like the use a coarse mesh for initial calculations and use those solution to initilize the fine mesh. I am able to view the coarse grid upto level 3 in 3D mesh but I am not able to save or export the coarse mesh. Is it possible to do that in AUTOGRID5? Thank you

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A CFX-POST error (ver 14.5.7)	wangyflp88	CFX	2	July 22, 2017 00:17
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 06:20
Unable to install OpenFOAM 1.6-ext	Maimouna	OpenFOAM Installation	23	May 8, 2014 05:47
Mesh motion with Translation & Rotation	Doginal	CFX	2	January 12, 2014 06:21
OpenFOAM on MinGW crosscompiler hosted on Linux	allenzhao	OpenFOAM Installation	127	January 30, 2009 19:08

March 11, 2019, 03:14		#2
colinda1 Senior Member Colinda Join Date: May 2012 Location: Brussels Posts: 151 Rep Power: 13	It is for use with FINE™/Turbo or FINE™/Open solver? In that case, you could manage in the solver set-up.