CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > NUMECA

plotting quantities in theta direction at particular radius

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   October 18, 2019, 03:19
Default plotting quantities in theta direction at particular radius
New Member
Navjot joshi
Join Date: May 2019
Posts: 1
Rep Power: 0
navjot is on a distinguished road

I was trying to plot theta vs static pressure to see how static pressure is varying at the inlet of the blade at a particular span location ( 95% span) along the circumferential direction in CFView. I am running an unsteady case for 360 degrees simulation for an axial compressor.

I had tried to cut a section at the blade leading edge and then plot the static pressure at the section, then exported the active surface quantities and, wrote a code for plotting theta vs static pressure. The plotted data is not giving any solid conclusion about how static pressure is varying due to the approximation of radius.

Is there is any easy way to plot in CFView theta vs quantity at a particular radius of a section?

thanking you,

Navjot Joshi
IIT bombay

Last edited by navjot; November 4, 2019 at 06:28.
navjot is offline   Reply With Quote


cfview, numeca fine/open, postprocessing

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Flow Direction: normal to boundary!!! Atit CFX 1 August 2, 2015 13:42
Changing inflow velocity direction deteriorates lift and drag ziggo FLUENT 3 July 24, 2013 08:39
SST turbulence with Gamma theta and Boussinesq model kmgraju CFX 2 June 11, 2013 00:46
Plotting the velocity profile in normal direction along a curved surface StSchiff OpenFOAM 0 December 1, 2011 05:01
Plotting velocity and direction contours bhavin1986 Main CFD Forum 2 April 29, 2011 16:58

All times are GMT -4. The time now is 03:12.