Aerodynamic coefficients

AndreaVise · March 5, 2018, 13:44

Hi everybody,
this is my fist post in this forum, I have a problem with Numeca software.
I have an aerodynamic profile in a simple domain, I have make the mesh ad start the solution with Fine Open. In the monitor compre the Lift and Drag force, my question is:

can I see directly the value of the aerodynamic coefficients Cl and Cd? If so where?
Tnk

Andrea

DarylMusashi · March 6, 2018, 15:16

Dear Andrea,

yes, it is given out by one of the standard files of the computation. Please have a look into the computation directory, at the bottom of the .wall file the computed lift and drag coefficient with its reference values is given out. You can easily access this file with any text editor.

Please make sure that you have set in the FINE/Open GUI -> Computation Control -> Outputs to "External Flow".

Kind regards
Holger

veera · November 4, 2019, 01:30

after my computaion , i cant see cl and cd values ..its showing zero values , its not updating

colinda1 · November 13, 2019, 04:25

Did you activate the "compute force and torque" for the applicable solid patches in the solid boundary conditions page?

massimiliano.tarrini · February 24, 2020, 04:30

............

March 5, 2018, 13:44	Aerodynamic coefficients	#1
AndreaVise New Member Andrea Visentini Join Date: Feb 2018 Posts: 1 Rep Power: 0	Hi everybody, this is my fist post in this forum, I have a problem with Numeca software. I have an aerodynamic profile in a simple domain, I have make the mesh ad start the solution with Fine Open. In the monitor compre the Lift and Drag force, my question is: can I see directly the value of the aerodynamic coefficients Cl and Cd? If so where? Tnk Andrea

November 4, 2019, 01:30	cl and cd	#3
veera New Member veerappan Join Date: Apr 2019 Posts: 15 Rep Power: 7	after my computaion , i cant see cl and cd values ..its showing zero values , its not updating

February 24, 2020, 04:30	.....................	#5
massimiliano.tarrini New Member Massimiliano Tarrini Join Date: Jul 2009 Location: PISA Italy Posts: 22 Rep Power: 16	............ Last edited by massimiliano.tarrini; March 3, 2020 at 02:58.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Calculate aerodynamic coefficients with openfoam using only opensource programs	Xwang	OpenFOAM	20	May 20, 2016 11:26
Aerodynamic Coefficients	sukratu	OpenFOAM Programming & Development	7	August 26, 2015 11:15
Aerodynamic coefficients	daxterss	Fidelity CFD	2	April 10, 2012 02:20
[Fluent] Aerodynamic Forces and Coefficients in 180-grid	info_bahaider	FLUENT	0	January 4, 2012 04:28
Computing aerodynamic coefficients on bidimensional sections in 3D problems	Aragon	FLUENT	0	July 22, 2009 04:07

November 13, 2019, 04:25		#4
colinda1 Senior Member Colinda Join Date: May 2012 Location: Brussels Posts: 151 Rep Power: 13	Did you activate the "compute force and torque" for the applicable solid patches in the solid boundary conditions page?