Fine Marine - Creating waves

Secrettt · February 15, 2019, 06:13

I'm doing a study on seakeeping using the Fine Marine software.
However, i'm unable to create the wave needed to provide resistance for simulation. Does anyone have any guides, tutorials or videos that can help me in creating the waves in Fine Marine?

Rodrigo Correa · November 13, 2019, 05:33

Hello,
Do you have access to the Documentation? You can find a very good description of how to deal with waves in Fine/Marine in the following link:

https://portal.numeca.be/docs/Defaul...CFAQ%7C_____12

Basically you have two options to generate wave:
1. Internal Wave Generator
2. Boundary Condition Wave Generator

By the way, you can also use the C-Wizard to automatically set the seakeeping simulation.

Best Regards,
Rodrigo

akbarbagusd · September 30, 2021, 22:01

please help me too
i got these problem when i trying to simulate seakeeping
Information about the y+ distance :
===================================
- Body Vessel Min 0.1411396E+00 Max 0.1679460E+03
Procedure Cal_Co: Negative volume!
IFace = 1204589 0
FluxV = 6.208115071207692E-011
ICell = 766023
Vol_Cell = 0.000000000000000E+000
Stop
Feature "isis_dynamic" 1
Feature "isiscfd_MPROC_2" 1

February 15, 2019, 06:13	Fine Marine - Creating waves	#1
Secrettt New Member Nicky Join Date: Feb 2019 Posts: 1 Rep Power: 0	I'm doing a study on seakeeping using the Fine Marine software. However, i'm unable to create the wave needed to provide resistance for simulation. Does anyone have any guides, tutorials or videos that can help me in creating the waves in Fine Marine?

November 13, 2019, 05:33	Fine Marine - Creating waves	#2
Rodrigo Correa New Member Rodrigo Join Date: Jul 2015 Posts: 18 Rep Power: 10	Hello, Do you have access to the Documentation? You can find a very good description of how to deal with waves in Fine/Marine in the following link: https://portal.numeca.be/docs/Defaul...CFAQ%7C_____12 Basically you have two options to generate wave: 1. Internal Wave Generator 2. Boundary Condition Wave Generator By the way, you can also use the C-Wizard to automatically set the seakeeping simulation. Best Regards, Rodrigo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[waves2Foam] combined set of waves with waves2Foam	blaise	OpenFOAM Community Contributions	7	December 16, 2023 08:33
[ANSYS Meshing] Creating a region of fine mesh within 3D fluid domain	raven	ANSYS Meshing & Geometry	1	August 13, 2014 11:11
Possible Bug in pimpleFoam (or createPatch) (or fluent3DMeshToFoam)	cfdonline2mohsen	OpenFOAM	3	October 21, 2013 09:28
WAVES GENERATION IN A PORT OR BRAKE WAVES. important	tecnicaf1	STAR-CCM+	1	May 27, 2011 07:32
CFD Animations of breaking waves	Dommermuth	Main CFD Forum	0	June 17, 2009 11:47

September 30, 2021, 22:01		#3
akbarbagusd New Member Akbar Bagus Darmawan Join Date: Sep 2021 Posts: 2 Rep Power: 0	please help me too i got these problem when i trying to simulate seakeeping Information about the y+ distance : =================================== - Body Vessel Min 0.1411396E+00 Max 0.1679460E+03 Procedure Cal_Co: Negative volume! IFace = 1204589 0 FluxV = 6.208115071207692E-011 ICell = 766023 Vol_Cell = 0.000000000000000E+000 Stop Feature "isis_dynamic" 1 Feature "isiscfd_MPROC_2" 1