CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > NUMECA

Export geomTurbo file in Autogrid

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 4, 2021, 13:38
Default Export geomTurbo file in Autogrid
  #1
Member
 
Join Date: Dec 2020
Posts: 38
Rep Power: 3
ulugbey is on a distinguished road
Hello,


I am using Fine Turbo 14.2. I imported CAD file in Autogrid 5. I heard that there is a possibility to write out geomTurbofile from the imported CAD File. How can export geomTurbo file from the imported CAD File?

Thanks in advance!

Best regards

Last edited by ulugbey; December 4, 2021 at 18:54.
ulugbey is offline   Reply With Quote

Old   December 6, 2021, 04:25
Default
  #2
Senior Member
 
Colinda
Join Date: May 2012
Location: Brussels
Posts: 144
Rep Power: 12
colinda1 is on a distinguished road
Hi,
It is indeed possible to export to a geomTurbo file as described in detail in the user guide in the dedicated section of the Geometry definition chapter.

Btw, you may want to update your installation to 16.1 as the version 14.2 is quite outdated.

Best regards,
Colinda
colinda1 is offline   Reply With Quote

Old   December 20, 2021, 00:47
Default
  #3
Senior Member
 
Hamid Zoka
Join Date: Nov 2009
Posts: 277
Rep Power: 17
Hamidzoka is on a distinguished road
hi;
Simply right click on the imported blade on the Autogrid screen and select export option. a window will appear which allows you modify settings of the exported geometry such as number of sections, number of points on each side, etc..
Before exporting the geometry, make sure that your imported blade has intersections with hub and shroud curves and inlet and outlet boundaries are generated at its upstream and downstream.

Best
Hamidzoka is offline   Reply With Quote

Reply

Tags
autogrid5, numeca fine/open

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[swak4Foam] Installation Problem with OF 6 version Aurel OpenFOAM Community Contributions 14 November 18, 2020 17:18
[Other] Adding solvers from DensityBasedTurbo to foam-extend 3.0 Seroga OpenFOAM Community Contributions 9 June 12, 2015 18:18
[swak4Foam] swak4foam building problem GGerber OpenFOAM Community Contributions 54 April 24, 2015 17:02
[OpenFOAM] Annoying issue of automatic "Rescale to Data Range " with paraFoam/paraview 3.12 keepfit ParaView 60 September 18, 2013 04:23
DxFoam reader update hjasak OpenFOAM Post-Processing 69 April 24, 2008 02:24


All times are GMT -4. The time now is 17:11.