CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Fidelity CFD (https://www.cfd-online.com/Forums/fidelity-cfd/)
-   -   Turbulence model and Reynolds number (https://www.cfd-online.com/Forums/fidelity-cfd/243410-turbulence-model-reynolds-number.html)

neal803 June 16, 2022 15:01

Turbulence model and Reynolds number
 
What is the most practiced turbulence model now?

The task is to evaluate the influence of the inlet Reynolds number on the compressor characteristic.

What is the practice of applying the turbulence model and mesh parameters for stationary flow at similar task?

Hamidzoka July 19, 2022 03:23

Hi;
This is a very general question. According to the mentioned research topic, you should look for the most accurate one. More accurate models needs better mesh qualities and needs more works to reach a converged solution. Maybe in your case using a transition model together with turbulence model is necessary since laminar-turbulent transition is expected to happen around the airfoils.

Regards


All times are GMT -4. The time now is 13:42.