CFD Online Logo CFD Online URL
Home > Forums > NUMECA


Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   April 4, 2003, 00:42
Default error
Bob Hahry
Posts: n/a
Hi, Every one,

I have problem in using Numeca60, The technique supporter in our country can't resolve the problem, who can answer me? Thanks lots.

The messages in MSDOS window when I start the IGG are list in the follows,


CONFIG but_3d

CONFIG blockBut CONFIG 1 3 4 HDriver type : WOGL version : 2.24 planes : 24 colors : 16777216 max colors : 16777216 z buffer depth : 0 hard cutting planes: 0 hard lights : 1 hard gouraud : yes hard phong : no width : -1 cm height : -1 cm aspect ratio : -1 max width : 32 cm max height : 24 cm width resolution : 32 px/cm height resolution : 32 px/cm

'import site' failed; use -v for traceback ->STL:Tool:GroupSelector:updateGroups ->STL:Tool:GroupSelector:updateGroups HOOPS information (2,2)

There was an unexpected Hoops internal error -

You must name either a particular family member or

a particular Aheight to Mark-System-Default



Bob Hahry

  Reply With Quote

Old   April 4, 2003, 12:06
Default Re: error
John M.
Posts: n/a
That sounds ugly. Might want to try changing from the default graphics driver - don't know if this info is in the manual or not though.

I'm curious - what country are you in?

  Reply With Quote

Old   April 8, 2003, 10:40
Default Re: error
Allan D. Grosvenor
Posts: n/a
Dear Bob,

We have been unable to find any record of your support request to any of our worldwide offices. Please send an E-mail directly to, stating your company name and referring to this issue.

Best regards, Allan
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
strange fluent error: Primitive Error at Node 0 Jean-Baptiste FLUENT 6 September 20, 2012 16:07
error in COMSOL:'ERROR:6164 Duplicate Variable' bhushas Main CFD Forum 1 May 30, 2008 04:35
"Error: Floating point error: invalid number" MI Kim FLUENT 2 January 4, 2007 11:00
Fatal error error writing to tmp No space left on device maka OpenFOAM Installation 2 April 3, 2006 08:48
Error: Floating point error: invalid number Bob FLUENT 3 June 3, 2005 18:11

All times are GMT -4. The time now is 03:26.