CFD Online Discussion Forums

CFD Online Discussion Forums (
-   NUMECA (
-   -   about boundary conditions (

whoami November 8, 2004 10:16

about boundary conditions
there is a segregator with bulb and to set the boundary conditions. i set vecolity and static temperature at inlet,static pressure at outlet.however,after 2000 steps,global residual is about -0.5,massflow error between inlet and outlet is 10%. grid quality:min orthogonality is 9.46,max aspect ratio is 10000(because of bulb). thank you very much!

yujiabeizi May 11, 2012 07:45

u can set total pressure at inlet and total temperature ,static temperature at outlet.

All times are GMT -4. The time now is 04:00.