Aerodynamic simulation

Amech1423 · March 10, 2011, 01:41

Hello.My name is am. this is the first thread that i wrote. i am beginner in using FineHexa. im doing miniproject about WiG aircraft. my objective is just to get the value of lift coefficient and drag coefficient, that all. i already done the meshing, create the box until applying the viscous layer. the problem is, i dont know how to use the fine hexa to run the simulation. i already import the meshing file, and next i dont how to enter the data, which parameter need to be default, which must be fill. Can someone help me please? or have some tutorial regarding to aerodynamic analysis? very need someone help right now.im using FineHexa 2.10.4 right now.

please email me : amech1423@yahoo.com

oldshoes81 · June 5, 2011, 06:13

Hi Amech,

Running the computation may need some technique and thus you will need to go for some training. From the training, you will know what is the best mesh suit for your computation. The physical parameters that you provide is sensitive to your output (Post-result) and we don't stick to 'rubbish-in-rubbish-out'. You could contact me for more info.

Regards
CJ
NUMIT Enterprise, Malaysia
+6 017 656 3436
http://maccom-numit.blogspot.com
http://www.numit.com.my
Email : seiko.q@numit.com.my

March 10, 2011, 01:41	Aerodynamic simulation	#1
Amech1423 New Member Am Join Date: Mar 2011 Posts: 1 Rep Power: 0	Hello.My name is am. this is the first thread that i wrote. i am beginner in using FineHexa. im doing miniproject about WiG aircraft. my objective is just to get the value of lift coefficient and drag coefficient, that all. i already done the meshing, create the box until applying the viscous layer. the problem is, i dont know how to use the fine hexa to run the simulation. i already import the meshing file, and next i dont how to enter the data, which parameter need to be default, which must be fill. Can someone help me please? or have some tutorial regarding to aerodynamic analysis? very need someone help right now.im using FineHexa 2.10.4 right now. please email me : amech1423@yahoo.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Simulation of a complex wing in solidworks flow simulation	niels1900	FloEFD, FloWorks & FloTHERM	6	April 20, 2011 10:44
GUI crash and simulation engine still running	RPJones	FLOW-3D	2	November 9, 2010 08:18
velocity profile export from a simulation onto another	sudhirlv	STAR-CCM+	1	September 12, 2010 18:57
strange simulation error	Ralf Schmidt	FLUENT	2	May 4, 2007 13:02
transient simulation: natural convection problem?	Basics	CFX	3	September 25, 2002 09:42

June 5, 2011, 06:13		#2
oldshoes81 Member CJ Join Date: Apr 2010 Location: Malaysia Posts: 69 Rep Power: 15	Hi Amech, Running the computation may need some technique and thus you will need to go for some training. From the training, you will know what is the best mesh suit for your computation. The physical parameters that you provide is sensitive to your output (Post-result) and we don't stick to 'rubbish-in-rubbish-out'. You could contact me for more info. Regards CJ NUMIT Enterprise, Malaysia +6 017 656 3436 http://maccom-numit.blogspot.com http://www.numit.com.my Email : seiko.q@numit.com.my