CFD Online Logo CFD Online URL
Home > Forums > NUMECA


Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   September 22, 2010, 06:53
Post Igg
New Member
Rajpal Singh Bhadoria
Join Date: Sep 2010
Posts: 1
Rep Power: 0
rajpal is on a distinguished road
I am using igg for the aircraft mesh........but i am facing problem to make vortex trail in end of wing...can you tell me that how to use elliptic smooth option............
rajpal is offline   Reply With Quote

Old   January 24, 2011, 08:09
Lightbulb Smooth meshing
New Member
Join Date: Jan 2011
Posts: 14
Rep Power: 8
sanboju is on a distinguished road

Is it your problem, a boundary layer problem? you can define how high you wanna be the increase of the transition mesh adjusting parameters in Grid--> Create face --> planar faces smoothing. You have to define the cell width (is the distance from the wall for the first layer), the control layers number, and expansion ratio for the transition from the first to the last layer.

One recomendation friend, for a good meshing the trailing edge must not finishes in a vortex. You can fill the vortex and for example, cut with a circle of 1-2 diameter.

Another think I recomend you is to remeshing the leading edge and the trailing edge. Once you choose the number of points of the mesh over the upstream and downstream of the wing, you can selec one kind of edges distribution. I recomend you to define an hyperbolic tangent with 0.002 spacing.

When you finish all the steps I tell you, yo have to smooth again.

I hope I'll be helpful.

sanboju is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
IGG AUTO-Grid Michael NUMECA 5 May 29, 2017 03:08
Bouncing in IGG Rikio NUMECA 0 November 5, 2007 23:27
Plugin for own output format in Numeca (IGG)... Jaroslaw Rachwalski NUMECA 3 June 25, 2007 11:00
Python Skripts for IGG Ole Ritter NUMECA 2 April 21, 2003 05:02
import lofted surfaces in IGG rolando guerrieri NUMECA 2 April 18, 2003 09:37

All times are GMT -4. The time now is 13:30.