CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Fidelity CFD (https://www.cfd-online.com/Forums/fidelity-cfd/)
-   -   Error importing mesh from Hexpress to Fineturbo (https://www.cfd-online.com/Forums/fidelity-cfd/83965-error-importing-mesh-hexpress-fineturbo.html)

cheche January 17, 2011 05:33

Error importing mesh from Hexpress to Fineturbo
 
Hi all,

I am a new user of Numeca and have finished going through the tutorials. I want to try to run a simulation on my own geometry, creating a mesh in Hexpress from a parasolid file posed no problems. However when I open Fine turbo and try to link a grid fill (.igg) I get an error with a pop up box saying:

"Mesh file is incorrect"

and the mesh file does not load.. Has anybody ever encountered this issue or know of how to sort it out?

Thanks in advance!

Hamidzoka January 22, 2011 02:49

Dear cheche;
"Fine Turbo" only accepts structured multi block meshes generated in "IGG" or "Autogrid" programs. if you use Hexpress, which is an unstructured mesh, Fine Turbo will naturally reject it. you should use "Fine Hexa" instead to solve "Hexpress" generated meshes.

regards

cheche January 26, 2011 11:14

Thank you for this information I will look into the matter.

On an other point:
I am trying to run a simulation in fine turbo on a simple fan I have modeled. When I launch the computation the solver crashes before anything has time to begin and I get the following error in the log:

!createBcBranch : THIS BC COULD NOT BE COARSENED IN BLOCK 5
! 1 1 1 73 40 1

The conditions in my model are based on the conditions defined in tutorial 1 which is very similar to my case. Would any body have any information on this matter?

Thanks in advance!

Hamidzoka January 27, 2011 00:04

Dear Cheche;
It seems there is a problem with your mesh.
multi-grid can not be executed for the current mesh.
you can check the followings:
- check if there is negative cells in your domain.
- inactive multi-grid in "FINE/TURBO" and see if the program runs.

does it help?
regards

cheche January 27, 2011 04:35

Thanks for the advice, I got fed up and restarted my mesh from zero and it seems to be working now. I am having some trouble with boundary conditions but I hope I will work my way through.

Thanks a lot for your help!


All times are GMT -4. The time now is 08:41.