|March 20, 2012, 13:49||
Run two different flows
Join Date: Sep 2010
Posts: 14Rep Power: 8
I have to run a simulation with Numeca Fine considering two inlet flows that mix inside a reservoir:
first flow: air.
second flow: oxygen + SO2 with a determined concentration
I'm not really sure if I can do this with Fine. I should be capable of retrieving the SO2 concentration at the outlet.
|April 5, 2012, 21:06||
To run this type of simulation, you will need to use combustion module in your fineopen. 2 inlets with one outlet is alright in this case. You may need a combustion table that describes your thermodynamic properties of your species and this table will only be generated by NUMECA, so i would encourage you to seek for your local representative for help.
Please keep in mind that no reaction will be considered during the simulation.
|numeca, two flows|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Parallel run in fluent for multiphase flow||apurv||FLUENT||2||August 3, 2011 19:44|
|Batch Run with Initial values file||krrishcfd||CFX||1||July 28, 2011 02:35|
|First Parallel Run - need some help||Gian Maria||OpenFOAM||3||June 17, 2011 12:08|
|How to run and save tranisent case on Cray XD1||Leon||FLUENT||0||October 3, 2006 21:59|
|problems with LES run||Tim||CFX||1||February 27, 2006 08:28|