Mass conservation error overInterDyMFoam (OF v.1706)
Dear all,
I tried making a bug-report here (https://develop.openfoam.com), though I was not allowed to open a new issue. Therefore, I will report the bug here instead and hope that it is picked up. OpenFoam version: v1706 Solver: overInterDyMFoam Tutorial: floatingBody Modifications: 1. In the file background/constant/dynamicMeshDict, I set the property accelerationRelaxation to a value of 0.0. This effectively allows for the modelling of a fixed, floating box. 2. I extended the simulation time to something like 50 s instead of the 4.0 s in the tutorial. 3. I removed the damBreak component of the setFieldsDict, such that the water level is flat. Observed behaviour: After the modifications, the tutorial essentially models a fixed box in a closed container. It was expected to observe a stagnant solution. The only complication being that the fixed box is treated with the overset functionality. It was rather observed that the water quickly drained from the computational domain. I expect that there is something happening on the interface of the two computational grids, but it was not apparent, what exactly happens in the overset-functionality, so I do not have any suggested solution. Kind regards and thank you for looking into this, Niels P.S. I am very happy to see this new development and I see many possible applications, where we are currently restricted. |
You'll have to register to post on develop.openfoam.com. Can you please post your issue on the issue tracker?
Thanks, Mattijs |
Hi Mattijs,
I did register, but every time I click on "New Issue", I simply get the list of current issues. I have tested in both Firefox and Explorer with the same outcome. Kind regards, Niels |
Did you log in? Are you accessing https://develop.openfoam.com/Development/OpenFOAM-plus?
|
Hi Mattijs,
Sorry for the late reply. Yes, I log in and I still experience the same behaviour, namely that I cannot submit issues. I can see that you have opened an (related?) error, so thank you. Kind regards, Niels |
We can masquerade as you and go to project, click on New Issue and all looks normal. Strange.
|
Hi Mattijs,
I am so sorry for the inconvenience. I went directly to "Issues" with the left drop-down menu, instead of choosing the project and then issues. The latter works, not the former. I have added some feedback to your code change. I see some improvement, but it is not fixed yet. Let us continue in the bug-tracker. Kind regards, Niels |
All times are GMT -4. The time now is 22:48. |