[AliVali]

Hi Foamers,



I am running this example

/OpenFOAM-v2006/tutorials/multiphase/compressibleInterDyMFoam/laminar/sphereDrop/


In this example, cyclicAMI boundaries are used in combination with a dyanmicMesh which uses layerAdditionRemoval. The model runs well. However, the problem is when I want to add a function to get free surface isoSurfaces.

And want to make isoSurfaces using the following function
functions
{
Surfaces
{
type surfaces;
libs ("libsampling.so");
writeControl adjustableRunTime;
writeInterval 0.001;
surfaceFormat vtk;
interpolationScheme cellPointFace;
fields
(
U
);
surfaces
(
freeSurface_near
{
type isoSurface;
isoField alpha.water;
isoValue 0.5;
interpolate true;
}

);
}

}



It sounds there is a problem with driving isoSurfaces when cyclicAMI boundaries are used.

Any suggestion would be highly appreciated.

Ali


The error message is
[1] #0 Foam::error:rintStack(Foam::Ostream&) at ??:?
[1] #1 Foam::sigSegv::sigHandler(int) at ??:?
[1] #2 ? in /lib/x86_64-linux-gnu/libpthread.so.0
[1] #3 Foam::tmp<Foam::Field<double> > Foam::PrimitivePatchInterpolation<Foam::PrimitiveP atch<Foam::SubList<Foam::face>, Foam::Field<Foam::Vector<double> > >[1] #4 Foam::cyclicAMIPointPatchField<double>::swapAddSep arated(Foam::UPstream::commsTypes, Foam::Field<double>&) const at ??:?
[1] #5 void Foam::volPointInterpolation::addSeparated<double>( Foam::GeometricField<double, Foam:ointPatchField, Foam:ointMesh>&) const at ??:?
[1] #6 void Foam::volPointInterpolation::interpolateBoundaryFi eld<double>(Foam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&, Foam::Geom>[1] #7 void Foam::volPointInterpolation::interpolate<double>(F oam::GeometricField<double, Foam::fvPatchField, Foam::volMesh> const&, Foam::GeometricField<do>[1] #8 Foam::sampledIsoSurface::getIsoFields() const at ??:?
[1] #9 Foam::sampledIsoSurface::updateGeometry() const at ??:?
[1] #10 Foam::sampledSurfaces:erformAction(unsigned int) at ??:?
[1] #11 Foam::functionObjects::timeControl::write() at ??:?
[1] #12 Foam::functionObjectList::execute() at ??:?
[1] #13 Foam::Time::run() const at ??:?
[1] #14 ? at ??:?
[1] #15 __libc_start_main in /lib/x86_64-linux-gnu/libc.so.6
[1] #16 ? at ??:?
[AUS180:21774] *** Process received signal ***
[AUS180:21774] Signal: Segmentation fault (11)
[AUS180:21774] Signal code: (-6)
[AUS180:21774] Failing at address: 0x3e80000550e
[AUS180:21774] [ 0] /lib/x86_64-linux-gnu/libpthread.so.0(+0x14420)[0x7f673e9e1420]
[AUS180:21774] [ 1] /lib/x86_64-linux-gnu/libpthread.so.0(raise+0xcb)[0x7f673e9e12ab]
[AUS180:21774] [ 2] /lib/x86_64-linux-gnu/libpthread.so.0(+0x14420)[0x7f673e9e1420]
[AUS180:21774] [ 3] /opt/OpenFOAM/OpenFOAM-v2006/platforms/linux64Gcc63DPInt32Opt/lib/libfiniteVolume.so(_ZNK4Foam27PrimitivePatchInterp olationINS_14Primitiv>[AUS180:21774] [ 4] /opt/OpenFOAM/OpenFOAM-v2006/platforms/linux64Gcc63DPInt32Opt/lib/libmeshTools.so(_ZNK4Foam24cyclicAMIPointPatchFiel dIdE16swapAddSeparate>[AUS180:21774] [ 5] /opt/OpenFOAM/OpenFOAM-v2006/platforms/linux64Gcc63DPInt32Opt/lib/libfiniteVolume.so(_ZNK4Foam21volPointInterpolatio n12addSeparatedIdEEvR>[AUS180:21774] [ 6] /opt/OpenFOAM/OpenFOAM-v2006/platforms/linux64Gcc63DPInt32Opt/lib/libfiniteVolume.so(_ZNK4Foam21volPointInterpolatio n24interpolateBoundar>[AUS180:21774] [ 7] /opt/OpenFOAM/OpenFOAM-v2006/platforms/linux64Gcc63DPInt32Opt/lib/libfiniteVolume.so(_ZNK4Foam21volPointInterpolatio n11interpolateIdEEvRK>[AUS180:21774] [ 8] /opt/OpenFOAM/OpenFOAM-v2006/platforms/linux64Gcc63DPInt32Opt/lib/libsampling.so(_ZNK4Foam17sampledIsoSurface12getIs oFieldsEv+0xcd7)[0x7f>[AUS180:21774] [ 9] /opt/OpenFOAM/OpenFOAM-v2006/platforms/linux64Gcc63DPInt32Opt/lib/libsampling.so(_ZNK4Foam17sampledIsoSurface14updat eGeometryEv+0x4b)[0x7>
[AUS180:21774] [12] /opt/OpenFOAM/OpenFOAM-v2006/platforms/linux64Gcc63DPInt32Opt/lib/libOpenFOAM.so(_ZN4Foam18functionObjectList7execut eEv+0x252)[0x7f673f4f>[AUS180:21774] [13] /opt/OpenFOAM/OpenFOAM-v2006/platforms/linux64Gcc63DPInt32Opt/lib/libOpenFOAM.so(_ZNK4Foam4Time3runEv+0xaf)[0x7f673f50f9ef]
[AUS180:21774] [14] compressibleInterDyMFoam[0x4451ba]
[AUS180:21774] [15] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf3)[0x7f673e7f4083]
[AUS180:21774] [16] compressibleInterDyMFoam[0x458522]
[AUS180:21774] *** End of error message ***
--------------------------------------------------------------------------
Primary job terminated normally, but 1 process returned
a non-zero exit code. Per user-direction, the job has been aborted.
--------------------------------------------------------------------------