CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Bugs

renumberMesh increases max aspect ratio

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 2, 2009, 10:15
Default renumberMesh increases max aspect ratio
  #1
New Member
 
Join Date: Mar 2009
Posts: 29
Rep Power: 17
ayoros is on a distinguished road
Hi all,

Sometimes I see renumberMesh increasing max aspect ratio, max skewness, max non - orthogonality.

I find this weird because it is only supposed to reorder the nodes, not to move them.

I must say that it happens when large aspect ratio (around 20) exists before renumbering.

Did anyone experiment such a behavior ? Or must I pay more attention to my initial mesh ?

Thanks,
Fabien
ayoros is offline   Reply With Quote

Old   April 3, 2009, 06:17
Default
  #2
Senior Member
 
Mattijs Janssens
Join Date: Mar 2009
Posts: 1,419
Rep Power: 26
mattijs is on a distinguished road
Might be a write truncation problem. Increase the write precision in your controlDict or even better set the writeFormat to binary.
mattijs is offline   Reply With Quote

Old   April 3, 2009, 08:18
Default
  #3
New Member
 
Join Date: Mar 2009
Posts: 29
Rep Power: 17
ayoros is on a distinguished road
Thanks Mattijs ! You were right. I turned back write precision to 6 and renumberMesh works well.
ayoros is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
On the damBreak4phaseFine cases paean OpenFOAM Running, Solving & CFD 0 November 14, 2008 22:14
aspect ratio vs. y+ hammam CFX 3 August 6, 2007 11:41
High Aspect Ratio elements Flavio CFX 2 November 24, 2006 13:01
Could anybody help me see this error and give help liugx212 OpenFOAM Running, Solving & CFD 3 January 4, 2006 19:07
Aspect Ratio at high turbulent and swirled flows zago FLUENT 0 May 19, 2004 03:37


All times are GMT -4. The time now is 11:23.