|
[Sponsors] |
ForceCoeffs in OF-1.6.x not giving coefficients |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
August 25, 2009, 09:55 |
ForceCoeffs in OF-1.6.x not giving coefficients
|
#1 |
New Member
Richard Samuel
Join Date: Mar 2009
Location: Canberra, ACT, Australia
Posts: 9
Rep Power: 17 |
Hi Foamers,
Has anyone had problems with forceCoeffs in OF-1.6.x ? I am using "type forceCoeffs" and have included the 2 new keywords, but when I run the case I get only standard non-Coeff force output - the headings are pressure/viscous, not Cd/Cl etc. Richard |
|
August 26, 2009, 02:48 |
|
#2 |
Senior Member
Join Date: Mar 2009
Posts: 854
Rep Power: 22 |
Thanks for letting us know. Actually you will find that only the header is inconsistent, the values should be the force coefficients not the forces. I will push a fix for the
header today. H |
|
August 27, 2009, 03:47 |
|
#3 |
New Member
Richard Samuel
Join Date: Mar 2009
Location: Canberra, ACT, Australia
Posts: 9
Rep Power: 17 |
Thanks Henry for your quick response. Yes indeeed it is only the headings that are incorrect - I should have recognised that the numbers looked strangely familiar .
Regards Richard |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Calculate aerodynamic coefficients with openfoam using only opensource programs | Xwang | OpenFOAM | 20 | May 20, 2016 11:26 |
lift and drag coefficients around a ground vehicle | Pedro | CFX | 3 | September 5, 2012 18:31 |
2D Flow over cylinder, low lift/drag coefficients | olives03 | FLUENT | 1 | February 11, 2011 18:05 |
Computing aerodynamic coefficients on bidimensional sections in 3D problems | Aragon | FLUENT | 0 | July 22, 2009 04:07 |
closure coefficients in 2-eq. turb. models | Michael | Main CFD Forum | 2 | December 8, 2003 12:15 |