splitMeshRegions doesn't work.

PetSul · September 2, 2009, 04:55

Hello,

here is the original thread

http://www.cfd-online.com/Forums/ope...shregions.html

I have a fluent mesh (.msh) imported to OpenFOAM, I used fluent3DMeshToFoam to convert it and it went nicely. Also meshCheck went ok.

mattijs asked me to send a testcase here, but the attachment exceeds the limit so I can't put it here. It's about 0.5M. Can I email it to someone?

Regards,

Petri Sulasalmi

mattijs · September 2, 2009, 05:17

Just send it to me directly. The domain is opencfd.co.uk, username is m.janssens

mattijs · September 2, 2009, 06:15

It wasn't clearing out the fvMesh geometric data. I pushed a fixed splitMeshRegions.C to 1.6.x.

PetSul · September 2, 2009, 06:26

Quote:

Originally Posted by mattijs

It wasn't clearing out the fvMesh geometric data. I pushed a fixed splitMeshRegions.C to 1.6.x.

Where can I get the code? Do I just replace the old splitMeshRegions.C with the fixed code?

mattijs · September 2, 2009, 07:06

See the git instructions on http://www.opencfd.co.uk/openfoam/download.html.

You could probably just replace the 1.6 splitMeshRegions.C but 1.6.x contains quite a few bug fixes.

September 2, 2009, 04:55	splitMeshRegions doesn't work.	#1
PetSul Member Petri Sulasalmi Join Date: Jul 2009 Location: Finland Posts: 32 Rep Power: 16	Hello, here is the original thread http://www.cfd-online.com/Forums/ope...shregions.html I have a fluent mesh (.msh) imported to OpenFOAM, I used fluent3DMeshToFoam to convert it and it went nicely. Also meshCheck went ok. mattijs asked me to send a testcase here, but the attachment exceeds the limit so I can't put it here. It's about 0.5M. Can I email it to someone? Regards, Petri Sulasalmi

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ATTENTION! Reliability problems in CFX 5.7	Joseph	CFX	14	April 20, 2010 15:45
cfx+Fortran cannot work with 2 CPUs on windows PC	lee	CFX	1	May 8, 2006 10:36
Why do the Plant library cases don't work?	Alumna	Phoenics	6	June 22, 2004 12:08
why my In-Form doesn't work?	green	Phoenics	2	May 27, 2004 21:03
Help! Subroutine can't work!	Miko	CFX	6	June 4, 2003 21:04

September 2, 2009, 05:17		#2
mattijs Senior Member Mattijs Janssens Join Date: Mar 2009 Posts: 1,419 Rep Power: 26	Just send it to me directly. The domain is opencfd.co.uk, username is m.janssens

September 2, 2009, 06:15		#3
mattijs Senior Member Mattijs Janssens Join Date: Mar 2009 Posts: 1,419 Rep Power: 26	It wasn't clearing out the fvMesh geometric data. I pushed a fixed splitMeshRegions.C to 1.6.x.

September 2, 2009, 07:06		#5
mattijs Senior Member Mattijs Janssens Join Date: Mar 2009 Posts: 1,419 Rep Power: 26	See the git instructions on http://www.opencfd.co.uk/openfoam/download.html. You could probably just replace the 1.6 splitMeshRegions.C but 1.6.x contains quite a few bug fixes.