CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Bugs

HashTable Binary write format

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 15, 2010, 15:23
Default HashTable Binary write format
  #1
Senior Member
 
Sandeep Menon
Join Date: Mar 2009
Location: Amherst, MA
Posts: 403
Rep Power: 25
deepsterblue will become famous soon enough
Not sure if this is a bug, but nevertheless...

It appears that HashTable contents cannot be written in binary format to disk (but ascii with either compressed/uncompressed works just fine). Is this a limitation of the binary format (due to coding complications, etc)? Or has it just not been implemented yet?

With the write-option in controlDict set to binary, the HashTable header specifies "binary", but the contents are still in ASCII form. This becomes problematic during the re-read from disk.

I'm using 1.5-dev, by the way...
__________________
Sandeep Menon
University of Massachusetts Amherst
https://github.com/smenon
deepsterblue is offline   Reply With Quote

Old   March 16, 2010, 11:03
Default
  #2
Senior Member
 
Join Date: Mar 2009
Posts: 854
Rep Power: 22
henry is on a distinguished road
I have tested binary IO of HashTable in OpenFOAM-1.6.x and it works fine. Are you able to reproduce the problem in OpenFOAM-1.6.x? If so could you send a code example which reproduces the problem?

H
henry is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to write Tecplot binary file(.plt) in CFD code on Linux 64 platform? markailee Tecplot 5 December 16, 2010 08:03
Error to re-open fluent case file J.Gimbun FLUENT 0 April 27, 2006 09:42
Binary File format for Tecplot CFD Student Tecplot 3 February 27, 2006 06:29
Who can write the binary diffusion coefficient ?? Hsin-Ping FLUENT 1 April 15, 2002 03:22
Sliding mesh error Karl Kevala FLUENT 4 February 21, 2001 16:52


All times are GMT -4. The time now is 13:18.