CFD Online Discussion Forums

CFD Online Discussion Forums (
-   OpenFOAM Bugs (
-   -   UNV to OF conversion (

Aleksey_R July 23, 2011 10:37

UNV to OF conversion
2 Attachment(s)
Greetings, colleagues.

Probably, I found bug in ideasUnvToFoam. I've created mesh in Salome 6.3.0 and converted it into OF using ideasUnvToFoam. The mesh was damaged during conversion. I attach 2 png-files which explain the problem.

The unv-file and the result of it's conversion into OF format may be downloaded by following link:

OF version: 1.7.1
OS: OpenSUSE 11.4 64 bit

The simulation problem is flow in 2D tube around gaussian-like obstacle.

Best regards, Aleksey.

Aleksey_R July 25, 2011 17:18

At last, I solved this problem. Solution: scale mesh with coefficient 100 -> save in .unv -> convert to OpenFOAM format -> scale 0.01.

It appeared that OpenFOAM converter fails to read small quantities...

All times are GMT -4. The time now is 14:39.