UNV to OF conversion

Aleksey_R · July 23, 2011, 10:37

Greetings, colleagues.

Probably, I found bug in ideasUnvToFoam. I've created mesh in Salome 6.3.0 and converted it into OF using ideasUnvToFoam. The mesh was damaged during conversion. I attach 2 png-files which explain the problem.

The unv-file and the result of it's conversion into OF format may be downloaded by following link:

http://files.mail.ru/MRBVD3

OF version: 1.7.1
OS: OpenSUSE 11.4 64 bit

The simulation problem is flow in 2D tube around gaussian-like obstacle.

Best regards, Aleksey.

Aleksey_R · July 25, 2011, 17:18

At last, I solved this problem. Solution: scale mesh with coefficient 100 -> save in .unv -> convert to OpenFOAM format -> scale 0.01.

It appeared that OpenFOAM converter fails to read small quantities...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mesh conversion exits prematurely (Salome to OF)	DMcP	OpenFOAM	0	July 14, 2011 02:07
[Salome] unv mesh corrupted after createPatch	maddalena	OpenFOAM Meshing & Mesh Conversion	1	February 18, 2010 07:43
[Commercial meshers] Several problems with the mesh conversion utility when converting the meshes from Gridgen	su_junwei	OpenFOAM Meshing & Mesh Conversion	2	July 26, 2008 23:58
[Salome] UNV IO Source Code	gdbaldw	OpenFOAM Meshing & Mesh Conversion	4	March 7, 2008 08:47
Energy Conversion Systems (Power and Pro.) Tools	Gordan Feric / Engineering Software (EngWare)	Main CFD Forum	0	August 26, 2001 23:14

July 25, 2011, 17:18		#2
Aleksey_R Member Aleksey Rukhlenko Join Date: Nov 2009 Location: Moscow Posts: 55 Rep Power: 16	At last, I solved this problem. Solution: scale mesh with coefficient 100 -> save in .unv -> convert to OpenFOAM format -> scale 0.01. It appeared that OpenFOAM converter fails to read small quantities...