[solids4Foam] Installing solids4foam v2.0 with FE4.1 on Ubuntu 20.04

Nicolas FORESTAL · January 27, 2023, 10:56

hello,

I have some issues to compile solids4Foam on my laptop. I use Ubuntu 20.04 and I compile FOAM-Extend with gfortran 7. The Allwmake says the compilation is complete but I don't have the solver solids4Foam.

I attached a log file to the comment.

I'm new in CFD and programming and I didn't no why it doesn't work.

Is there anyone who can give me some advice for my case.

Thanks,

iBatistic · February 1, 2023, 16:06

The compilation of the solver did not finish without error, read carefully log file, and you will find the problem in this line:

Code:

/usr/bin/ld*: ne peut trouver -lgfortran 
collect2: error: ld returned 1 exit status

As a workaround, check the status of S4F_USE_GFORTRAN variable and set it to zero, then try compilation again.

Nicolas FORESTAL · February 2, 2023, 11:49

Thanks for your help. I set S4F_USE_GFORTRAN to zero but it didn't work. So I checked my gfortran compiler and installed gfortran-7, and now it's seem to work.

February 1, 2023, 16:06		#2
iBatistic New Member Ivan Batistić Join Date: Sep 2022 Location: Zagreb, Croatia Posts: 14 Rep Power: 3	The compilation of the solver did not finish without error, read carefully log file, and you will find the problem in this line: Code: /usr/bin/ld*: ne peut trouver -lgfortran collect2: error: ld returned 1 exit status As a workaround, check the status of S4F_USE_GFORTRAN variable and set it to zero, then try compilation again.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[OpenFOAM.com] Installing OpenFoam-v1706 on Ubuntu 20.04	Shahin123	OpenFOAM Installation	4	April 15, 2024 03:46
[OpenFOAM.com] Installing OpenFOAM 2.4.0 on Ubuntu 20.04 for Windows	RKyle	OpenFOAM Installation	5	January 25, 2022 10:45
[foam-extend.org] Installing FOAM-Extend 4.0 on Ubuntu 20.04	serfriz	OpenFOAM Installation	19	November 8, 2021 18:24
SU2-7.0.1 on ubuntu 18.04	hyunko	SU2 Installation	7	March 16, 2020 04:37
OpenFOAM extended 4.0 Error with Multinode Set-up	Liweix	OpenFOAM Running, Solving & CFD	1	February 18, 2020 00:50

February 2, 2023, 11:49		#3
Nicolas FORESTAL New Member Nicolas FORESTAL Join Date: Jan 2023 Posts: 3 Rep Power: 3	Thanks for your help. I set S4F_USE_GFORTRAN to zero but it didn't work. So I checked my gfortran compiler and installed gfortran-7, and now it's seem to work.