CFD Online Discussion Forums

CFD Online Discussion Forums (
-   OpenFOAM Community Contributions (
-   -   [swak4Foam] stagnation at groovyBC (

immortality November 27, 2012 03:26

stagnation at groovyBC
How is it possible to have a p0 and T0 boundary condition without having velocity field at inlet in groovyBC?just these stagnation properties are known.its important for me.sorry for repeat.

treima November 27, 2012 03:35


do you mean fixedValue boundary conditions?



immortality November 27, 2012 04:19

hi dear treima
no.its known only stagnation temp and press on inlet patch.then I dont know haw I put velocity boundary condition.Im working on it.but ill thank any idea.
Thank you for your helping and benefitical suggestions on before posts.thanks.

treima November 27, 2012 04:21

For the velocity i would suggest zeroGradient.

immortality November 27, 2012 05:08

thank you treima
But I think velocity should read from outside of the grid domain.due to characteristic law you may know that tell at inlet 5 property should be assigned from out and only 1 from inside the domain and vice at outlet for stability of solution.
But velocity have 3 components
But ill examine your good suggestion if it didn't have stability problem all is ok.

All times are GMT -4. The time now is 15:05.