Just to report back, I actually just made swak4Foam to work with Intel compiler. I used version 13.0 of the Intel compiler. I first built the base OpenFOAM 2.1.1 using this Intel compiler (my user specifically asked for this older version). This wasn't easy but once that was done, the only additional change I needed was to comment out in the swak4Foam Allwmake script a line switching to GNU compiler when building the utilities. There is a comment there saying:

#revert back to the default Gcc compiler, due to some problems that Icc has
#with overly complex classes

I found that the Intel compiler v 13.0 can build the utilities without any problem.

On hand this is good news (not everything is getting worse. At least the Intel-compiler is improving). On the other hand this means that when I remove this fix then half the Icc-users will be unhappy. Hmmm

Hi dear Bernhard,I used :
but it showed a lot of information the last part is:
and funkysetFields can't be recognized :
why is isn't downloaded well?

The download went well, but this is the source code release, not the binary release. You still have to run Allwmake.

(edit: we had a discussion about source vs binary here: http://www.cfd-online.com/Forums/ope...tml#post468727 post #7 to #10)

thanks dear Bruno,
but its the results:
I wanted to install bison++ that seems be newer than bison and maybe better,but it want to delete 357MB! why?

"bison++" is not used. What is used is "bison".

Installation instructions are available here: http://www.cfd-online.com/Forums/ope...tml#post464095 post #4. You can skip the step #2, since you have already downloaded the source code.

By the way, which exact OpenFOAM version are you using?
edit: Never mind, it's 2.2.1. Then the instructions should work just fine.

Dot before Allwmake:
or
the way it is described in the README

Even if it is better I'm pretty sure that it won't work with the swak-sources. Stick with bison

Installing Swak 0.2.3 on OF 2.3
 

Hi,
I have some problems downloading the new version of swak, 0.3. Whenever I use
I get the following error:

Therefore I tried compiling the old version of swak (0.2.3) on OF 2.3, but I am facing some errors and compilation stops.
I will be so thankful if you can help me
Best wishes

P.S: Uncommenting #define FOAM_LOOKUPCLASS_NO_CONST didn't work.

The SVN works for me. If the problem persists I suspect a firewall that blocks unknown protocols on your side. Talk to the admin of your company/university/government whether anything can be done about this. Otherwise go to the SourceForge-site surf to relevant directory in the SVN. There is a link to download a tarball (don't attempt to download the whole SVN as a tarball!)

Concerning the compilation error: you don't say which OF-version you use. Probably one that is too new for the old swak-version

Dear Gschaider,

Unfortunately there is no link to download the tarball for that specific folder. There is a link named download snapshop which downloads the whole SVN.
Well, I use the latest version of OpenFOAM, which is 2.3.
Is it possible to upload the mentioned tarball here to download?

With all the best.

Greetings to all!

@Mojtaba:
You can (try to) download from one these links:

• In zip format: https://github.com/Unofficial-Extend...ive/master.zip
• In tar.gz format: https://github.com/Unofficial-Extend.../master.tar.gz

They are both for an unofficial mirror repository of the swak4Foam, in git format.
The problem might be that these two links use the HTTPS protocol, which you might not be able to access from Iran. If they don't work for you, let us know.


In the mean time, the following command should work without any problems:
This is because instead of using the "svn://" protocol, it uses the "http://" one, therefore it should not have any port related problems.


Oh, by the way, I think swak4Foam 0.3.0 doesn't support yet OpenFOAM 2.3.0. This was reported here: http://sourceforge.net/apps/mantisbt...iew.php?id=209

Best regards,
Bruno

Dear Bruno thank you for your detailed answer.
Well HTTPS protocols worked just fine, Thanks.
But the second SVN link with HTTP protocol gave the same error.

Thank you for your information about the compatibility issues. I will try using OF 2.2 to continue.

Gschnaider, Thanks to you, too.

With all the best.
Mojtaba.

Other possibilities to download tarballs are "Download Snapshot" at

http://sourceforge.net/p/openfoam-ex...ies/swak4Foam/

(that is the last release) and

http://sourceforge.net/p/openfoam-ex...rt_2.0.x/tree/

(this is the head of the 2.x-branch)

swak4foam and openfoam-2.3
 

Just want to say thank you for quickly adapting swak4foam to openfoam-2.3.x. port_2.0.x compiles and works fine for my use cases here.

Thanks for the feedback. Your cases don't involve the LagrangianParser, simpleSearchableSurfaces or meshToMesh-interpolation I suppose? These are the regions which still need testing because they changed most

You are right I just did some quick tests which involved the use of libsimpleSwakFunctionObjects and libgroovyBC.

Hi Billie,

Can I ask you where you downloaded the version of swak ?

I tried this one :
but it doesn't compile ("missing file *.H" error style).

EDIT :

Ok for the record :
There still are errors at the beginning, but then it compiles.

The actual "error messages" would be helpful but I guess I know what it is: to support multiple OF-versions swak relies on #ifdefs and wmkdeps doesn't like that. Nothing I can do about it

Well I'm not sure if it's really errors or just standard outputs since it does compile at the end (everything "up to date at the second launch of Allwmake).
The errors are all like :

Yep. That is what I'm talking about. This is a header that was renamed in newer versions and now and the utility that generates the dep-files does not find it. This is not a problem for the actual compilation