[Other] rhoEnergyFoam-Compressible Low-Dissipative solver

DavideM · August 11, 2018, 07:30

Hi all,

I recently developed rhoEnergyFoam, a compressible solver with shock capturing capabilities that is sensibly less dissipative than the standard compressible OpenFOAM solvers.

The solver is described in the following publication
https://www.sciencedirect.com/scienc...45793017301305

and the source code is available for research purposes at
http://newton.dima.uniroma1.it/rhoenergyfoam/

Cheers,

Davide

mAlletto · December 22, 2018, 11:27

just tied to connect to the web page of the solver, but the web page seems unreachable.

wyldckat · December 23, 2018, 18:20

Quick answer: The server must have gone down only recently. There is a Google Cache dated 21st of December 2018, so only a couple of days ago. You can find it by searching for:

Code:

site:uniroma1.it rhoenergyfoam

SHISHIR SRIVASTAVA · March 26, 2023, 06:40

I would like to use rhoEnergyFoam for homogeneous isotropic decaying turbulence for hypersoinc flows. This simulation i want to run for 128x128x128 grids. I am using OpenFoam v6. Please suggest me what changes are required in constant and system folders to run this simulation? Test case of 32x32x32 have been performed.

August 11, 2018, 07:30	rhoEnergyFoam-Compressible Low-Dissipative solver	#1
DavideM New Member Join Date: Feb 2013 Posts: 1 Rep Power: 0	Hi all, I recently developed rhoEnergyFoam, a compressible solver with shock capturing capabilities that is sensibly less dissipative than the standard compressible OpenFOAM solvers. The solver is described in the following publication https://www.sciencedirect.com/scienc...45793017301305 and the source code is available for research purposes at http://newton.dima.uniroma1.it/rhoenergyfoam/ Cheers, Davide snak and wyldckat like this.

December 23, 2018, 18:20		#3
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,974 Blog Entries: 45 Rep Power: 128	Quick answer: The server must have gone down only recently. There is a Google Cache dated 21st of December 2018, so only a couple of days ago. You can find it by searching for: Code: site:uniroma1.it rhoenergyfoam __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

March 26, 2023, 06:40	Using rhoEnergyFoam for hypersonic flow to simulate HIT	#4
SHISHIR SRIVASTAVA New Member SHISHIR SRIVASTAVA Join Date: Mar 2023 Posts: 1 Rep Power: 0	I would like to use rhoEnergyFoam for homogeneous isotropic decaying turbulence for hypersoinc flows. This simulation i want to run for 128x128x128 grids. I am using OpenFoam v6. Please suggest me what changes are required in constant and system folders to run this simulation? Test case of 32x32x32 have been performed.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PEMFC model with FLUENT	brahimchoice	FLUENT	22	April 19, 2020 15:44
[ANSYS Meshing] Help with element size	sandri_92	ANSYS Meshing & Geometry	14	November 14, 2018 07:54
compressible flow calculation error using rhoSimpleFoam solver	student4326	OpenFOAM Running, Solving & CFD	7	November 2, 2015 11:34
thobois class engineTopoChangerMesh error	Peter_600	OpenFOAM	4	August 2, 2014 09:52
Near compressible fluid - denstiy-based solver	Hooman	Main CFD Forum	8	December 19, 2011 03:03

December 22, 2018, 11:27		#2
mAlletto Senior Member Michael Alletto Join Date: Jun 2018 Location: Bremen Posts: 615 Rep Power: 15	just tied to connect to the web page of the solver, but the web page seems unreachable.