[waves2Foam] waveFoam 3D case Gambit mesh crash

p.roberto · May 21, 2014, 13:33

Hi,

I'm trying to simulate stokesFirst waves with a period of 1.1s and height 0.08m in a 3D tank with variable depht. I made my mesh using Gambit and used fluent3DMeshToFoam to import it with no problems, but whem i run the ./Allrun the solver waveFoam crashes.
I don't know if the error is on my mesh or in another place.

Here is the log.files from waveFoam.log and checkMesh.log:

caselogfiles.tar.gz

Could someone help it this??

Thanks, Paulo

ngj · May 21, 2014, 13:41

Hi Roberto,

The part of the log.checkMesh, which states:

Code:

*Number of regions: 2
    The mesh has multiple regions which are not connected by any face.
  <<Writing region information to "0/cellToRegion"

makes me suspect that something utterly wrong with the mesh. Furthermore, your patch "bottom" has the same number of faces as the number of cells, so if bottom is really the bottom of the domain, then you only have one (1) cell over the vertical. This will be the second thing to correct.

Kind regards,

Niels

May 21, 2014, 13:33	waveFoam 3D case Gambit mesh crash	#1
p.roberto New Member Paulo Roberto Join Date: Apr 2013 Posts: 6 Rep Power: 14	Hi, I'm trying to simulate stokesFirst waves with a period of 1.1s and height 0.08m in a 3D tank with variable depht. I made my mesh using Gambit and used fluent3DMeshToFoam to import it with no problems, but whem i run the ./Allrun the solver waveFoam crashes. I don't know if the error is on my mesh or in another place. Here is the log.files from waveFoam.log and checkMesh.log: caselogfiles.tar.gz Could someone help it this?? Thanks, Paulo

May 21, 2014, 13:41		#2
ngj Senior Member Niels Gjoel Jacobsen Join Date: Mar 2009 Location: Copenhagen, Denmark Posts: 1,903 Rep Power: 38	Hi Roberto, The part of the log.checkMesh, which states: Code: *Number of regions: 2 The mesh has multiple regions which are not connected by any face. <<Writing region information to "0/cellToRegion" makes me suspect that something utterly wrong with the mesh. Furthermore, your patch "bottom" has the same number of faces as the number of cells, so if bottom is really the bottom of the domain, then you only have one (1) cell over the vertical. This will be the second thing to correct. Kind regards, Niels __________________ Please note that I do not use the Friend-feature, so do not be offended, if I do not accept a request.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
decomposePar problem: Cell 0contains face labels out of range	vaina74	OpenFOAM Pre-Processing	37	July 20, 2020 06:38
[mesh manipulation] Importing Multiple Meshes	thomasnwalshiii	OpenFOAM Meshing & Mesh Conversion	18	December 19, 2015 19:57
From Autocad to Gambit, what is the mesh strategy?	kkpal	ANSYS Meshing & Geometry	0	September 24, 2013 12:55
How to control Minximum mesh space?	hung	FLUENT	7	April 18, 2005 10:38
3-D Mesh Check in Gambit.....	SHR	FLUENT	4	March 25, 2003 04:10