[ImmersedBoundary] Immersed Boundary: Turbulence flow around a cylinder

sina_mech · July 19, 2016, 20:18

Hi all,

I'm trying to run a turbulence flow around a immersed boundary cylinder. but I keep getting this error:

Code:

--> FOAM FATAL ERROR: 
Attempt to cast type immersedBoundary to type immersedBoundaryVelocityWallFunction

    From function refCast<To>(From&)
    in file /opt/foam/foam-extend-3.2/src/foam/lnInclude/typeInfo.H at line 114.

FOAM aborting

I attached the case to this post.

Thank you in advance!

PS: Actually this could be a good example of turbulence on IB (which IB is an immersed body in the domain, and not a wall), and can be added to FOAM-ext package.

sina_mech · July 20, 2016, 12:05

I solved this problem. Let me know if you have the same issue!

courant_numero_uno · December 3, 2019, 11:17

Can you post the solution to the problem?

July 20, 2016, 12:05		#2
sina_mech Senior Member SinaJ Join Date: Nov 2009 Posts: 136 Rep Power: 16	I solved this problem. Let me know if you have the same issue! Last edited by sina_mech; July 21, 2016 at 15:06.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3D Windturbine simulation in SU2	k.vimalakanthan	SU2	15	October 12, 2023 05:53
Centrifugal fan	j0hnny	CFX	13	October 1, 2019 13:55
mass flow in is not equal to mass flow out	saii	CFX	12	March 19, 2018 05:21
flow over a cylinder urgent!	kevin	FLUENT	8	August 11, 2015 13:00
Natural convection - Inlet boundary condition	max91	CFX	1	July 29, 2008 20:28

December 3, 2019, 11:17		#3
courant_numero_uno New Member Join Date: Sep 2019 Posts: 17 Rep Power: 6	Can you post the solution to the problem?