 |
 |
 |
|
|
|
[Sponsors] | ||||
[swak4Foam] Setting field with a zone() condition using OpenFOAM V1912 setExprField |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 5, 2020, 20:38
|
Setting field with a zone() condition using OpenFOAM V1912 setExprField
|
#1 |
|
New Member
Jeff
Join Date: Sep 2018
Location: UNLV
Posts: 4
Rep Power: 7  |
Does the new OpenFOAM V1912 utility setExprFields allow for the condition of zone() to be used as is available for funkySetFields?
I did not see it as an option in https://www.openfoam.com/documentati...xprFields.html but I wouldn't be surprised if it is there and I've missed it. I have a multi-region model defined by several cellZones. I'd like to set initial field values for each zone. I have unresolved installation issues with installing swak4Foam with all versions of OpenFOAM (separate threads). I have successfully installed OpenFOAM V1912 and it would be terrific if I could accomplish the same field initialization with the setExprFields utility and forget about attempting to install swak4Foam. Thanks, Jeff |
|
|
|
|
|
| Tags |
| cellzones, funkysetfields, openfoam v1912, setexprfields, swak4foam |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [Other] dynamicTopoFVMesh and pointDisplacement | RandomUser | OpenFOAM Meshing & Mesh Conversion | 6 | April 26, 2018 07:30 |
| [Commercial meshers] Mesh conversion problem (fluent3DMeshToFoam) | Aadhavan | OpenFOAM Meshing & Mesh Conversion | 2 | March 8, 2018 01:47 |
| OpenFOAM 4.0 Released | CFDFoundation | OpenFOAM Announcements from OpenFOAM Foundation | 2 | October 6, 2017 05:40 |
| Journal file error | magicalmarshmallow | FLUENT | 3 | April 4, 2014 12:25 |
| Cells with t below lower limit | Purushothama | Siemens | 2 | May 31, 2010 21:58 |
Linear Mode
