How to install two versions of OpenFoam

Argen · August 9, 2012, 11:35

Quote:

Originally Posted by wyldckat

Hi Argen,

Nothing to worry about. As I described in the script:

You can now move on to running Allwmake in "OpenFOAM-1.5". Those other libraries will be built as intended.

Best regards,
Bruno

Thanks a lot, Bruno. It still doesn't work. The log is attached. Can you figure out what's wrong?

wyldckat · August 9, 2012, 11:38

This is very strange... OK, try these commands:

Code:

cd $WM_THIRD_PARTY_DIR
cd metis-5.0pre2
wclean libso GKlib
wmake libso GKlib

Argen · August 9, 2012, 12:08

Quote:

Originally Posted by wyldckat

This is very strange... OK, try these commands:

Code:

cd $WM_THIRD_PARTY_DIR
cd metis-5.0pre2
wclean libso GKlib
wmake libso GKlib

It was failed to make GKlib and the problem seems due to "cannot find -lm".

wyldckat · August 9, 2012, 12:14

Quote:

Originally Posted by Argen

It was failed to make GKlib and the problem seems due to "cannot find -lm".

I went to see what Linux distribution you have... Since it's Ubuntu, make sure you have everything you need installed:

Code:

sudo apt-get install build-essential flex bison cmake zlib1g-dev qt4-dev-tools libqt4-dev gnuplot libreadline-dev libncurses-dev libxt-dev

Argen · August 9, 2012, 13:34

Quote:

Originally Posted by wyldckat

I went to see what Linux distribution you have... Since it's Ubuntu, make sure you have everything you need installed:

Code:

sudo apt-get install build-essential flex bison cmake zlib1g-dev qt4-dev-tools libqt4-dev gnuplot libreadline-dev libncurses-dev libxt-dev

Thanks, Bruno. After installing those, I got the same error again.

wyldckat · August 9, 2012, 15:25

I've been reviewing the previous posts on this threads... are you certain this is active in your shell:

Code:

export LIBRARY_PATH=/usr/lib/x86_64-linux-gnu

August 9, 2012, 11:38		#22
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	This is very strange... OK, try these commands: Code: cd $WM_THIRD_PARTY_DIR cd metis-5.0pre2 wclean libso GKlib wmake libso GKlib __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

August 9, 2012, 15:25		#26
wyldckat Retired Super Moderator Bruno Santos Join Date: Mar 2009 Location: Lisbon, Portugal Posts: 10,975 Blog Entries: 45 Rep Power: 128	I've been reviewing the previous posts on this threads... are you certain this is active in your shell: Code: export LIBRARY_PATH=/usr/lib/x86_64-linux-gnu __________________ OpenFOAM: FAQ \| Getting started Forum: How to get help, to post code/output and forum guide Read this before sending me PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Can't get older versions of OpenFOAM	fabioc	OpenFOAM Installation	4	February 7, 2012 09:13
for every member help me please to install OpenFOAM	dima133	OpenFOAM Installation	1	January 8, 2012 16:36
how to install openfoam on ubuntu 1.4 ?	seyedashraf	OpenFOAM Installation	8	August 23, 2011 05:50
OpenFoam install script Error during paraFoam installation	SePe	OpenFOAM Installation	10	June 19, 2010 15:15
Install openFOAM 1.6 on debian 32bit - blockMesh: command not found	fossy	OpenFOAM Installation	1	August 28, 2009 04:06