CFD Online Discussion Forums
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Installation (https://www.cfd-online.com/Forums/openfoam-installation/)
-   -   Paraview Compiling Error (OpenFOAM 2.1.x + openSUSE 12.2) (https://www.cfd-online.com/Forums/openfoam-installation/112536-paraview-compiling-error-openfoam-2-1-x-opensuse-12-2-a.html)

wyldckat January 31, 2013 09:43
Hi Marco,

Ooops... I guess I overdid it with too much information :rolleyes:

As root, run only:
Code:
. /opt/OpenFOAM/OpenFOAM/OpenFOAM-2.1.1/etc/bashrc_debug
Best regards,
Bruno

sfigato January 31, 2013 09:59
HI Bruno,

trust me you cannot overdid anything..I just must get used linux..anyway I am runnig /makeparaView.
I hope everything will be fine!

I let you know
Thank you very much

Greets
Marco

sfigato January 31, 2013 10:16
Dear Bruno,

It finally works (thanks to you..obviously)!
The last step is done!
Thx and I hope this thread is helpful for some other else

Regards
Marco


All times are GMT -4. The time now is 09:12.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page