[DrUlMe]

Sorry, for such an error message,
but on my machines the installation for OpenSUSE 12.3 / 64bit fails:
sudo rpm -i http://www.openfoam.org/download/sus...2-1.x86_64.rpm
results in a:
error: unpacking of archive failed on file /opt/OpenFOAM-2.2.2/OpenFOAM-2.2.2.gtgz;52644682: cpio: read failed - Keine Daten verfügbar
error: OpenFOAM-2.2.2-1.x86_64: install failed

I tried several hosts for download (all the same size) and i got the content of the rpm.
Perhaps something was not included, as it should be. Fedora rpm is 10MB bigger.

Thanks in advance

Ulf

[wyldckat]

Greetings Ulf and welcome to the forum!

Well something went very wrong on their side. I've reported this just now here: http://www.openfoam.org/mantisbt/view.php?id=1006#c2568

If you're in a hurry to get OpenFOAM 2.2.2 to work on openSUSE 12.3, I suggest you try these instructions: http://openfoamwiki.net/index.php/In...#openSUSE_12.3

Best regards,
Bruno

[DrUlMe]

Thanks Bruno (and Sergio and Henry),
that was very fast!

The i586 suse version seems to be ok and installs.
But but the x86_64 has still an issue, only later:

rpm2cpio  OpenFOAM-2.2.2-1.x86_64.rpm | cpio -t
  ...
  ./opt/OpenFOAM-2.2.2/platforms/linux64GccDPOpt/lib/libsurfaceFilmModels.so
  cpio: verfrühtes Ende der Datei (file ends to early)

I tried to upgrade the issue in Mantis, but found no possibity to change it without getting a new entry. So i try it this way again, sorry.

Best regards

Ulf

[wyldckat]

Hi Ulf,

That bug report was closed and only the original poster can reopen it

I was able to reproduce the same error you got! Feel free to create a new bug report yourself, so that you can reopen it later on, if necessary

Best regards,
Bruno

[DrUlMe]

Thanks Bruno,

this issue has now an own bug report: http://www.openfoam.org/mantisbt/view.php?id=1057