foam-extend-3.1 and CentOS 6.5 CMake Version Trouble

cdm · October 27, 2014, 15:54

I'm testing CentOS 6.5 and was successful in installing OpenFOAM 2.3.0. However, the same cannot be said for foam-extend-3.1.

Is there an easy way to either:

1) update CMake on CentOS 6.5 (I can't find any useful info on Google or the CMake website on how to do this), or

2) get a ThirdParty CMake package such as provided for OpenFOAM 2.3.0 to facilitate the installation of foam-extend-3.1 in CentOS 6.5?

Thanks for the help.

cdm · October 27, 2014, 17:44

Okay, I was able to (mostly) compile foam-extend-3.1 with the following modifications:

1. As root, I installed CMake 2.8 using instructions from here:

Code:

wget http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
rpm -ivh epel-release-6.8.noarch.rpm
yum install cmake28
cd /usr/bin
mv cmake cmake26
mv ccmake ccmake26
mv cpack cpack26
mv ctest ctest26
ln -s cmake28 cmake
ln -s ccmake28 ccmake
ln -s cpack28 cpack
ln -s ctest28 ctest

2. Based on this link, I installed binutils-devel and loaded openmpi (since I'm using SYSTEMOPENMPI):

Code:

sudo yum install binutils-devel
module load openmpi-x86_64

3. Pull the git source code, source the bashrc, etc., as outlined here.

4. Created the $HOME/foam/foam-extend-3.1/etc/prefs.sh file with the following settings:

Code:

export FOAM_VERBOSE=1
compilerInstall=System
export WM_MPLIB=SYSTEMOPENMPI
export OPENMPI_DIR=/usr/lib64/openmpi
export OPENMPI_BIN_DIR=$OPENMPI_DIR/bin
export QT_THIRD_PARTY=1

5. Compiling using ./Allwmake.firstInstall > wmake.log 2>&1

Everything is compiling fine except for Paraview which requires Qt4 version 4.7.0 and it's only finding 4.6.2. I'll read through some of the other posts here to look into this, but curious why this is the case if using ThirdParty QT...

Hopefully this will help anyone else struggling with this.

cdm · October 27, 2014, 18:30

And ParaView compilation issue has been explained here with a fix outlined here.

1. Go into the file $WM_THIRD_PARTY_DIR/Allmake.stage4 and change any reference to QT version 4.8.5 to 4.8.6 (I just opened the file in a text editor and search/replace "4.8.5" with "4.8.6".

2. Same in the file $WM_PROJECT_DIR/etc/settings.sh.

3. Go to the folder $WM_THIRD_PARTY_DIR/rpmBuild/SPECS/ and copy the file qt-everywhere-opensource-src-4.8.5.spec to qt-everywhere-opensource-src-4.8.6.spec, then open the file and again change all references of "4.8.5" to "4.8.6", save, and close.

4. Re-compile and you should be good to go.

October 27, 2014, 15:54	foam-extend-3.1 and CentOS 6.5 CMake and QT Version Troubles with FIXES	#1
cdm Member Join Date: May 2013 Location: Canada Posts: 32 Rep Power: 12	I'm testing CentOS 6.5 and was successful in installing OpenFOAM 2.3.0. However, the same cannot be said for foam-extend-3.1. Is there an easy way to either: 1) update CMake on CentOS 6.5 (I can't find any useful info on Google or the CMake website on how to do this), or 2) get a ThirdParty CMake package such as provided for OpenFOAM 2.3.0 to facilitate the installation of foam-extend-3.1 in CentOS 6.5? Thanks for the help. Last edited by cdm; October 27, 2014 at 18:31.

October 27, 2014, 17:44		#2
cdm Member Join Date: May 2013 Location: Canada Posts: 32 Rep Power: 12	Okay, I was able to (mostly) compile foam-extend-3.1 with the following modifications: 1. As root, I installed CMake 2.8 using instructions from here: Code: wget http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm rpm -ivh epel-release-6.8.noarch.rpm yum install cmake28 cd /usr/bin mv cmake cmake26 mv ccmake ccmake26 mv cpack cpack26 mv ctest ctest26 ln -s cmake28 cmake ln -s ccmake28 ccmake ln -s cpack28 cpack ln -s ctest28 ctest 2. Based on this link, I installed binutils-devel and loaded openmpi (since I'm using SYSTEMOPENMPI): Code: sudo yum install binutils-devel module load openmpi-x86_64 3. Pull the git source code, source the bashrc, etc., as outlined here. 4. Created the $HOME/foam/foam-extend-3.1/etc/prefs.sh file with the following settings: Code: export FOAM_VERBOSE=1 compilerInstall=System export WM_MPLIB=SYSTEMOPENMPI export OPENMPI_DIR=/usr/lib64/openmpi export OPENMPI_BIN_DIR=$OPENMPI_DIR/bin export QT_THIRD_PARTY=1 5. Compiling using ./Allwmake.firstInstall > wmake.log 2>&1 Everything is compiling fine except for Paraview which requires Qt4 version 4.7.0 and it's only finding 4.6.2. I'll read through some of the other posts here to look into this, but curious why this is the case if using ThirdParty QT... Hopefully this will help anyone else struggling with this.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[OpenFOAM.org] OpenFOAM 2.3.0 on CentOS 6.5	entropies	OpenFOAM Installation	33	January 4, 2017 05:01
foam-extend-3.1 on CentOS 6.5	philippose	OpenFOAM Installation	0	June 23, 2014 06:04
Ansys v13.0 on CentOS 6.5	cvh	ANSYS	0	May 23, 2014 13:58
Error building ParaVIEW 3.12.0 in CentOS 6.5	wjm	OpenFOAM Installation	8	February 17, 2014 10:17

October 27, 2014, 18:30		#3
cdm Member Join Date: May 2013 Location: Canada Posts: 32 Rep Power: 12	And ParaView compilation issue has been explained here with a fix outlined here. 1. Go into the file $WM_THIRD_PARTY_DIR/Allmake.stage4 and change any reference to QT version 4.8.5 to 4.8.6 (I just opened the file in a text editor and search/replace "4.8.5" with "4.8.6". 2. Same in the file $WM_PROJECT_DIR/etc/settings.sh. 3. Go to the folder $WM_THIRD_PARTY_DIR/rpmBuild/SPECS/ and copy the file qt-everywhere-opensource-src-4.8.5.spec to qt-everywhere-opensource-src-4.8.6.spec, then open the file and again change all references of "4.8.5" to "4.8.6", save, and close. 4. Re-compile and you should be good to go.