|
[Sponsors] |
[OpenFOAM.org] Problem OpenFoam With VMWareFusio (OSX maverick) And VMWare Workstation (Win 8.1) |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 15, 2014, 15:02 |
Problem OpenFoam With VMWareFusio (OSX maverick) And VMWare Workstation (Win 8.1)
|
#1 |
New Member
Antonio Demarcus
Join Date: Dec 2014
Posts: 4
Rep Power: 11 |
am new to the forum, little linux expert and I do not write good English, I hope to be clear.
Following various instructions I installed Ubuntu on a mac and windows 8.1 Once I install the Ubuntu operating system 14:10 64-bit desktop, I followed the instructions to install OpenFOAM and ParaViewOpenfoam410. How tutorial I used these websites: http://www.openfoam.org/download/ubuntu.php and after http://openfoamwiki.net/index.php/In...M-2.3.0/Ubuntu 1) without restarting the virtual machine, everything works normally, I can start ParaView and tutorials without having problems. 2) Reboot the virtual machine and I screen appears so, the operating system goes into freezing. I then tried again the procedure: a - I reinstalled the virtual machine and 14:10 Ubuntu desktop 64-bit b - setup of OpenFOAM c - restart the virtual machine FREEZING ............also happens with VMware Workstation used on windows 8.1............. Could you please help me? |
|
December 15, 2014, 15:34 |
|
#2 |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,974
Blog Entries: 45
Rep Power: 128 |
Greetings Antonio and welcome to the forum!
Fortunately your written English is understandable When in doubt, you can always use Google Translate or a similar online service for helping you with the translation to English The problem is related to Ubuntu itself. It's a broken feature that a lot of people have experienced soon after installing Ubuntu 14.10 and 14.04. One possible solution is to do the following steps (found more than one source online, but they were all blogs that can easily disappear in a year or less):
Bruno
__________________
|
|
December 16, 2014, 03:30 |
|
#3 |
New Member
Antonio Demarcus
Join Date: Dec 2014
Posts: 4
Rep Power: 11 |
Thanks Bruno. I feel now the command and let you know the result.
Best regards Antonio |
|
December 16, 2014, 05:06 |
|
#4 | |
New Member
Antonio Demarcus
Join Date: Dec 2014
Posts: 4
Rep Power: 11 |
somehow, I have run the console ubuntu
I run the commands you give it to me ... but nothing to do. The screen is always locked. I describe the steps restare ..... user and PW CTRL+ALT+CANC Go to and Go to in the new terminal digit : Quote:
best regards Antonio |
||
December 17, 2014, 05:56 |
|
#5 |
New Member
Antonio Demarcus
Join Date: Dec 2014
Posts: 4
Rep Power: 11 |
I found the solution.
was an installation of about 6 hours https://openfoamwiki.net/index.php/I...u#Ubuntu_14.10 |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|