CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Installation (https://www.cfd-online.com/Forums/openfoam-installation/)
-   -   [OpenFOAM.org] OpenFOAM 2.3.1 compile on opensuse 12.3 needs MPFR (https://www.cfd-online.com/Forums/openfoam-installation/146641-openfoam-2-3-1-compile-opensuse-12-3-needs-mpfr.html)

derekm January 2, 2015 20:15

OpenFOAM 2.3.1 compile on opensuse 12.3 needs MPFR
 
executing .Allwmake in the thirdparty directory needed mpfr to be installed even though the system passed the requirement tests

mpfr-devel - Development files for the GNU multiple-precision floating-point library
libmpfr4 - The GNU multiple-precision floating-point shared library

A very minor niggle

wyldckat January 3, 2015 05:40

Greetings Derek,

To which installation instructions are you referring to?

Best regards,
Bruno

derekm January 3, 2015 14:22

it was the source description. But looking at it a again it doesnt actually tell you to run ./Allwmake

wyldckat January 3, 2015 14:51

Ah, many thanks for clearing that up! I've been so focused on writing the installation wiki pages (e.g. http://openfoamwiki.net/index.php/In...2.3.1/openSUSE ), that I forgot to report my findings on the bug tracker :(.

OK, I'll do a clean build as soon as I can, since there are a few more packages on the wiki that might not be extremely necessary for the base instructions on the official page: http://www.openfoam.org/download/source.php

wyldckat January 17, 2015 12:43

Quick update: I've finally followed on this topic and tested this, as well as reported this here: http://www.openfoam.org/mantisbt/view.php?id=1492


All times are GMT -4. The time now is 21:50.