CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Installation

Immersed Boundary on OF-ext-3.1 Installation Problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 18, 2015, 12:27
Default Immersed Boundary on OF-ext-3.1 Installation Problem
  #1
New Member
 
Join Date: Mar 2014
Posts: 12
Rep Power: 4
utkunun is on a distinguished road
Dear All,

I am working on a mac with OS X 10.6.8 (Snow Leopard). My purpose is to install immersed boundary solvers along with OpenFOAM-extend-3.1. In this regard,

1. I managed to install OpenFOAM version 2.1.x as in https://openfoamwiki.net/index.php/I...OpenFOAM_2.1.x and it works fine.

2. Then I installed OpenFOAM extend-3.1 as in https://openfoamwiki.net/index.php/I...oam-extend-3.1 (step 3) and this also finished smoothly.

3. Finally I tried to install immersed boundary solver-as in https://openfoamwiki.net/index.php/E...mersedBoundary, but in step 2.3 ./Allwmake returned errors and compilation was not successful. Specifically, each wmake returned the following error (I attached my log file to this post.):

ld: warning: directory not found for option '-L/Users/userme/foam/foam-extend-3.1/lib/darwinIntel64GccDPOpt/openmpi-macport-mp'

As stated in the error, openmpi-macport-mp does not exist where it's supposed to be.

I think it is related to foam-extend-3.1 being installed by a sparse image mount. In order to check that, I tried to compile foam-extend-3.1 next, which returned multiple errors complaining about disc space; but the openmpi-macport-mp directory was created this time. And when I tried to install immersed boundary solvers, this time the process finished smoothly without errors.

Would you please help on how to tackle this problem?

PS: I am sorry for the post format in advance if it's not suitable as this is my first post on the forum.
Attached Files
File Type: zip make.log.zip (1.1 KB, 2 views)
utkunun is offline   Reply With Quote

Old   July 19, 2015, 13:36
Default
  #2
Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 9,748
Blog Entries: 39
Rep Power: 103
wyldckat is a glorious beacon of lightwyldckat is a glorious beacon of lightwyldckat is a glorious beacon of lightwyldckat is a glorious beacon of lightwyldckat is a glorious beacon of light
Greetings utkunun,

Sourceforge.net is currently having problems, so I can't check if foam-extend 3.2 is already officially out or not

I haven't updated the wiki page for the "ImmersedBoundary" toolkit essentially for the same reason, i.e. I don't know if foam-extend 3.2 has already been officially released or not as its own repository.

All of this to say that as of foam-extend 3.2, the "ImmersedBoundary" toolkit is already integrated into it.

Either way, you will have to build from source code and after you clone the foam-extend 3.1 repository, you can git checkout the "nextRelease" branch, which has most (if not all) of the files for foam-extend 3.2, by running these commands:
Code:
git checkout nextRelease
Then you can try to proceed with the build instructions.

Beyond this, I don't have access to a Mac, so I have no idea how to build foam-extend from source code in it

Best regards,
Bruno
__________________
wyldckat is offline   Reply With Quote

Old   August 2, 2015, 14:46
Default
  #3
New Member
 
Join Date: Mar 2014
Posts: 12
Rep Power: 4
utkunun is on a distinguished road
Hello Bruno

Thank you for your response anyway.

Regards.
utkunun is offline   Reply With Quote

Old   August 10, 2015, 16:39
Default
  #4
Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 9,748
Blog Entries: 39
Rep Power: 103
wyldckat is a glorious beacon of lightwyldckat is a glorious beacon of lightwyldckat is a glorious beacon of lightwyldckat is a glorious beacon of lightwyldckat is a glorious beacon of light
For future reference, this was followed up here: http://www.cfd-online.com/Forums/ope...-10-6-8-a.html
wyldckat is offline   Reply With Quote

Reply

Tags
foam-extend-3.1, immersed boundary, installation issue, mac os x

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
sliding mesh problem in CFX Saima CFX 45 September 22, 2015 10:53
Problem with SIMPLEC-like finite volume channel flow boundary conditions ghobold Main CFD Forum 3 June 15, 2015 11:14
foam-extend 3.1, Immersed boundary cavity flow case modification problems Anamitra OpenFOAM 0 March 18, 2015 09:50
Waterwheel shaped turbine inside a pipe simulation problem mshahed91 CFX 3 January 10, 2015 12:19
GETVAR Error in Multiband Monte Carlo Radiation Simulation with Directional Source silvan CFX 3 June 16, 2014 09:49


All times are GMT -4. The time now is 17:28.