CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Installation

Unknown function type groovyBC

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree2Likes
  • 1 Post By wyldckat
  • 1 Post By hoseinhd

Reply
 
LinkBack Thread Tools Display Modes
Old   December 22, 2015, 12:17
Default Unknown function type groovyBC
  #1
New Member
 
hoseinhd's Avatar
 
hossein hadi
Join Date: Apr 2015
Posts: 15
Rep Power: 3
hoseinhd is on a distinguished road
Dear Foamers,
I have installed swak4Foam from the main SVN repository, using the svn command:
svn checkout svn://svn.code.sf.net/p/openfoamextend/svn/trunk/Breeder_2.0/libraries/swak4Foam/ swak4Foam and I ./Allwmake it.
Every function works fine, but when I use groovyBC function it will show an error:
Code:
FOAM FATAL ERROR: 
Unknown function type groovyBC

Valid functions are : 

92
(
CourantNo
DESModelRegions
Lambda2
Peclet
Q
addForeignMeshes
addGlobalVariable
blendingFactor
calculateGlobalVariables
clearExpressionField
coded
correctThermo
createSampledSet
createSampledSurface
dsmcFields
dumpSwakExpression
dumpSwakGlobalVariable
dynamicFunctionObjectListProxy
executeIfEnvironmentVariable
executeIfExecutableFits
executeIfFunctionObjectPresent
executeIfObjectExists
executeIfOpenFOAMVersionBiggerEqual
executeIfParallelSerial
executeIfPatch
executeIfSetOrZone
executeIfStartTime
executeIfSwakExpression
expressionField
fieldDistribution
foreignMeshesFollowTime
functionObjectListProxy
initPotentialFlow
initSwakFunctionObject
listMeshData
listRegisteredObjects
loadCompressibleTurbulenceModel
loadIncompressibleTurbulenceModel
loadPsiThermoModel
loadRhoThermoModel
loadSLGThermoModel
manipulateField
manipulatePatchField
panicDump
patchAverage
patchExpression
patchExpressionDistribution
patchFieldDistribution
patchFieldFlow
patchIntegrate
patchMassFlow
patchMassFlowAverage
patchProbes
pressureTools
probes
provokeSignal
readAndUpdateFields
readGravitation
recalcPhi
recalcThermoHe
removeGlobalVariable
residuals
scalarTransport
setDeltaTByTimeline
setTimeStep
sets
solveLaplacianPDE
solveTransportPDE
solverPerformanceToGlobalVariables
surfaces
swakCoded
swakExpression
swakExpressionAverageDistribution
swakExpressionDistribution
timeActivatedFileUpdate
timeDependentFvSolutionFvSchemes
trackDictionary
turbulenceFields
volumeAverage
volumeIntegrate
volumeMinMax
vorticity
wallShearStress
writeAdditionalFields
writeAndEndFieldRange
writeAndEndSwakExpression
writeFieldsOften
writeIfFieldOutside
writeIfSwakExpression
writeOldTimesOnSignal
yPlusLES
yPlusRAS
)
I have used
libs (
"libgroovyBC.so"
);
in controlDict. I have no idea where the problem is.

Thanks for your help
hoseinhd
hoseinhd is offline   Reply With Quote

Old   December 25, 2015, 15:48
Default
  #2
Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 9,748
Blog Entries: 39
Rep Power: 103
wyldckat is a glorious beacon of lightwyldckat is a glorious beacon of lightwyldckat is a glorious beacon of lightwyldckat is a glorious beacon of lightwyldckat is a glorious beacon of light
Greetings hoseinhd,

Please run the following commands inside the folder what you have the swak4Foam source code:
Code:
./Allwmake > log.make 2>&1
gzip < log.make > log.make.gz
Then please attach the file "log.make.gz" to your next post. This log file will tell us if everything was built properly or not.

Best regards,
Bruno
hoseinhd likes this.
__________________
wyldckat is offline   Reply With Quote

Old   December 26, 2015, 11:11
Default
  #3
New Member
 
hoseinhd's Avatar
 
hossein hadi
Join Date: Apr 2015
Posts: 15
Rep Power: 3
hoseinhd is on a distinguished road
Hi Bruno,
Thanks for your sincere help.
I have just solved my problem. The error was because I added groovyBC in functions of controlDict. An amateur mistake
I implemented groovyBC type in 0/U file and my case is running OK now.

Thanks
hoseinhd
wyldckat likes this.
hoseinhd is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
converting Fluent mesh to openfoam standard mesh deepesh OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 25 June 27, 2016 00:58
Inlet patch problems martyn88 OpenFOAM 5 October 1, 2012 03:39
Saving ParaFoam views and case sail OpenFOAM Paraview & paraFoam 9 November 25, 2011 16:46
Error with Wmake skabilan OpenFOAM Installation 3 July 28, 2009 00:35
compressible two phase flow in CFX4.4 youngan CFX 0 July 1, 2003 23:32


All times are GMT -4. The time now is 08:19.