foam-extend-3.2 groovyBC example wont execute
1 Attachment(s)
Hello All
I have installed foam-extend-3.2 on openSuse Leap and suspect there is a problem with the installation however a review of the log does not show any components that have failed or flagged an error - the make log is attached.
The main reason causing me to think this is when I run the groovyBC example called fillingTheDam (i.e. by running blockMesh then interFoam) I receive an error related to the simpleFunctionObject as below.
Code:
/*---------------------------------------------------------------------------*\
| ========= | |
| \\ / F ield | foam-extend: Open Source CFD |
| \\ / O peration | Version: 3.2 |
| \\ / A nd | Web: http://www.foam-extend.org |
| \\/ M anipulation | For copyright notice see file Copyright |
\*---------------------------------------------------------------------------*/
Build : 3.2-334ba0562a2c
Exec : interFoam
Date : Jun 17 2016
Time : 22:51:15
Host : linux-1afo
PID : 7679
CtrlDict : "/home/jfm/foam/jfm-3.2/swak4Foam_Examples/groovyBC/fillingTheDam/system/controlDict"
Case : /home/jfm/foam/jfm-3.2/swak4Foam_Examples/groovyBC/fillingTheDam
nProcs : 1
SigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time
--> FOAM Warning :
From function dlLibraryTable::open(const fileName& functionLibName)
in file db/dlLibraryTable/dlLibraryTable.C at line 124
could not load libOpenFOAM.so: cannot open shared object file: No such file or directory
--> FOAM Warning :
From function dlLibraryTable::open(const fileName& functionLibName)
in file db/dlLibraryTable/dlLibraryTable.C at line 124
could not load libswakPythonIntegration.so: cannot open shared object file: No such file or directory
Create mesh for time = 0
Reading g
Reading field pd
Reading field alpha1
Reading field U
Reading/calculating face flux field phi
Reading transportProperties
Selecting incompressible transport model Newtonian
Selecting incompressible transport model Newtonian
Calculating field g.h
Selecting turbulence model type laminar
time step continuity errors : sum local = 0, global = 0, cumulative = 0
PCG: Solving for pcorr, Initial residual = 0, Final residual = 0, No Iterations 0
time step continuity errors : sum local = 0, global = 0, cumulative = 0
Courant Number mean: 0 max: 0 velocity magnitude: 0
Starting time loop
Courant Number mean: 0 max: 0 velocity magnitude: 0
deltaT = 0.00119048
swak4Foam: Allocating new repository for sampledGlobalVariables
swak4Foam: Allocating new repository for sampledSets
--> FOAM Warning :
From function simpleFunctionObject::simpleFunctionObject
in file simpleFunctionObject/simpleFunctionObject.C at line 109
'outputControlMode' not found in fillingHeight
Assuming: timeStep
--> FOAM Warning :
From function simpleFunctionObject::simpleFunctionObject
in file simpleFunctionObject/simpleFunctionObject.C at line 117
'outputInterval' not found in fillingHeight
Assuming: 1
swak4Foam: Setting default mesh
--> FOAM Warning :
From function simpleFunctionObject::simpleFunctionObject
in file simpleFunctionObject/simpleFunctionObject.C at line 109
'outputControlMode' not found in maxFilling
Assuming: timeStep
--> FOAM Warning :
From function simpleFunctionObject::simpleFunctionObject
in file simpleFunctionObject/simpleFunctionObject.C at line 117
'outputInterval' not found in maxFilling
Assuming: 1
--> FOAM Warning :
From function simpleFunctionObject::simpleFunctionObject
in file simpleFunctionObject/simpleFunctionObject.C at line 109
'outputControlMode' not found in surfaceVel
Assuming: timeStep
--> FOAM Warning :
From function simpleFunctionObject::simpleFunctionObject
in file simpleFunctionObject/simpleFunctionObject.C at line 117
'outputInterval' not found in surfaceVel
Assuming: 1
swak4Foam: Allocating new repository for sampledSurfaces
--> FOAM Warning :
From function simpleFunctionObject::simpleFunctionObject
in file simpleFunctionObject/simpleFunctionObject.C at line 109
'outputControlMode' not found in surfaceSize
Assuming: timeStep
--> FOAM Warning :
From function simpleFunctionObject::simpleFunctionObject
in file simpleFunctionObject/simpleFunctionObject.C at line 117
'outputInterval' not found in surfaceSize
Assuming: 1
--> FOAM Warning :
From function simpleFunctionObject::simpleFunctionObject
in file simpleFunctionObject/simpleFunctionObject.C at line 109
'outputControlMode' not found in normalizedVolume
Assuming: timeStep
--> FOAM Warning :
From function simpleFunctionObject::simpleFunctionObject
in file simpleFunctionObject/simpleFunctionObject.C at line 117
'outputInterval' not found in normalizedVolume
Assuming: 1
--> FOAM Warning :
From function simpleFunctionObject::simpleFunctionObject
in file simpleFunctionObject/simpleFunctionObject.C at line 109
'outputControlMode' not found in getG
Assuming: timeStep
--> FOAM Warning :
From function simpleFunctionObject::simpleFunctionObject
in file simpleFunctionObject/simpleFunctionObject.C at line 117
'outputInterval' not found in getG
Assuming: 1
--> FOAM Warning :
From function functionObjectListProxy::functionObjectListProxy
in file functionObjectProxy/functionObjectListProxy/functionObjectListProxy.C at line 98
For getG the 'readDuringConstruction'-variable is ignored because this concrete class does not allow constructing the functionObjects during construction
--> FOAM Warning :
From function solvePDECommon::read(const dictionary& dict)
in file solvePDECommon.C at line 158
If you want the unsteady run to use relaxation set 'relaxUnsteady true;' in "::tracer"
swak4Foam: Allocating new repository for sampledMeshes
Manipulated field tracer in 2268 cells with the expression "0"
--> FOAM Warning :
From function simpleFunctionObject::simpleFunctionObject
in file simpleFunctionObject/simpleFunctionObject.C at line 109
'outputControlMode' not found in doWithPython
Assuming: timeStep
--> FOAM Warning :
From function simpleFunctionObject::simpleFunctionObject
in file simpleFunctionObject/simpleFunctionObject.C at line 117
'outputInterval' not found in doWithPython
Assuming: 1
--> FOAM Warning :
From function functionObjectListProxy::functionObjectListProxy
in file functionObjectProxy/functionObjectListProxy/functionObjectListProxy.C at line 98
For doWithPython the 'readDuringConstruction'-variable is ignored because this concrete class does not allow constructing the functionObjects during construction
Time = 0.00119048
MULES: Solving for alpha1
Liquid phase volume fraction = 0 Min(alpha1) = 0 Max(alpha1) = 1
MULES: Solving for alpha1
Liquid phase volume fraction = 0 Min(alpha1) = 0 Max(alpha1) = 1
--> FOAM FATAL ERROR:
This specialisation is not implemented
From function ExpressionResult::calcIsSingleValueInternal<bool>()
in file ExpressionResult/ExpressionResult.C at line 373.
FOAM exiting
Any assistance will be greatly appreciated
Regards
John |
