CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Installation

foam-extend-3.2 groovyBC example wont execute

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 17, 2016, 09:32
Default foam-extend-3.2 groovyBC example wont execute
  #1
JFM
New Member
 
JFM's Avatar
 
John Anonymous
Join Date: Jan 2011
Location: Melbourne Australia
Posts: 28
Rep Power: 8
JFM is on a distinguished road
Send a message via Skype™ to JFM
Hello All

I have installed foam-extend-3.2 on openSuse Leap and suspect there is a problem with the installation however a review of the log does not show any components that have failed or flagged an error - the make log is attached.

The main reason causing me to think this is when I run the groovyBC example called fillingTheDam (i.e. by running blockMesh then interFoam) I receive an error related to the simpleFunctionObject as below.

Code:
/*---------------------------------------------------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | foam-extend: Open Source CFD                    |
|  \\    /   O peration     | Version:     3.2                                |
|   \\  /    A nd           | Web:         http://www.foam-extend.org         |
|    \\/     M anipulation  | For copyright notice see file Copyright         |
\*---------------------------------------------------------------------------*/
Build    : 3.2-334ba0562a2c
Exec     : interFoam
Date     : Jun 17 2016
Time     : 22:51:15
Host     : linux-1afo
PID      : 7679
CtrlDict : "/home/jfm/foam/jfm-3.2/swak4Foam_Examples/groovyBC/fillingTheDam/system/controlDict"
Case     : /home/jfm/foam/jfm-3.2/swak4Foam_Examples/groovyBC/fillingTheDam
nProcs   : 1
SigFpe   : Enabling floating point exception trapping (FOAM_SIGFPE).

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

--> FOAM Warning : 
    From function dlLibraryTable::open(const fileName& functionLibName)
    in file db/dlLibraryTable/dlLibraryTable.C at line 124
    could not load libOpenFOAM.so: cannot open shared object file: No such file or directory
--> FOAM Warning : 
    From function dlLibraryTable::open(const fileName& functionLibName)
    in file db/dlLibraryTable/dlLibraryTable.C at line 124
    could not load libswakPythonIntegration.so: cannot open shared object file: No such file or directory
Create mesh for time = 0


Reading g
Reading field pd

Reading field alpha1

Reading field U

Reading/calculating face flux field phi

Reading transportProperties

Selecting incompressible transport model Newtonian
Selecting incompressible transport model Newtonian
Calculating field g.h

Selecting turbulence model type laminar
time step continuity errors : sum local = 0, global = 0, cumulative = 0
PCG:  Solving for pcorr, Initial residual = 0, Final residual = 0, No Iterations 0
time step continuity errors : sum local = 0, global = 0, cumulative = 0
Courant Number mean: 0 max: 0 velocity magnitude: 0

Starting time loop

Courant Number mean: 0 max: 0 velocity magnitude: 0
deltaT = 0.00119048
swak4Foam: Allocating new repository for sampledGlobalVariables
swak4Foam: Allocating new repository for sampledSets
--> FOAM Warning : 
    From function simpleFunctionObject::simpleFunctionObject
    in file simpleFunctionObject/simpleFunctionObject.C at line 109
    'outputControlMode' not found in fillingHeight
Assuming: timeStep
--> FOAM Warning : 
    From function simpleFunctionObject::simpleFunctionObject
    in file simpleFunctionObject/simpleFunctionObject.C at line 117
    'outputInterval' not found in fillingHeight
Assuming: 1
swak4Foam: Setting default mesh
--> FOAM Warning : 
    From function simpleFunctionObject::simpleFunctionObject
    in file simpleFunctionObject/simpleFunctionObject.C at line 109
    'outputControlMode' not found in maxFilling
Assuming: timeStep
--> FOAM Warning : 
    From function simpleFunctionObject::simpleFunctionObject
    in file simpleFunctionObject/simpleFunctionObject.C at line 117
    'outputInterval' not found in maxFilling
Assuming: 1
--> FOAM Warning : 
    From function simpleFunctionObject::simpleFunctionObject
    in file simpleFunctionObject/simpleFunctionObject.C at line 109
    'outputControlMode' not found in surfaceVel
Assuming: timeStep
--> FOAM Warning : 
    From function simpleFunctionObject::simpleFunctionObject
    in file simpleFunctionObject/simpleFunctionObject.C at line 117
    'outputInterval' not found in surfaceVel
Assuming: 1
swak4Foam: Allocating new repository for sampledSurfaces
--> FOAM Warning : 
    From function simpleFunctionObject::simpleFunctionObject
    in file simpleFunctionObject/simpleFunctionObject.C at line 109
    'outputControlMode' not found in surfaceSize
Assuming: timeStep
--> FOAM Warning : 
    From function simpleFunctionObject::simpleFunctionObject
    in file simpleFunctionObject/simpleFunctionObject.C at line 117
    'outputInterval' not found in surfaceSize
Assuming: 1
--> FOAM Warning : 
    From function simpleFunctionObject::simpleFunctionObject
    in file simpleFunctionObject/simpleFunctionObject.C at line 109
    'outputControlMode' not found in normalizedVolume
Assuming: timeStep
--> FOAM Warning : 
    From function simpleFunctionObject::simpleFunctionObject
    in file simpleFunctionObject/simpleFunctionObject.C at line 117
    'outputInterval' not found in normalizedVolume
Assuming: 1
--> FOAM Warning : 
    From function simpleFunctionObject::simpleFunctionObject
    in file simpleFunctionObject/simpleFunctionObject.C at line 109
    'outputControlMode' not found in getG
Assuming: timeStep
--> FOAM Warning : 
    From function simpleFunctionObject::simpleFunctionObject
    in file simpleFunctionObject/simpleFunctionObject.C at line 117
    'outputInterval' not found in getG
Assuming: 1
--> FOAM Warning : 
    From function functionObjectListProxy::functionObjectListProxy
    in file functionObjectProxy/functionObjectListProxy/functionObjectListProxy.C at line 98
    For getG the 'readDuringConstruction'-variable  is ignored because this concrete class does not allow  constructing the functionObjects during construction
--> FOAM Warning : 
    From function solvePDECommon::read(const dictionary& dict)
    in file solvePDECommon.C at line 158
    If you want the unsteady run to use relaxation set 'relaxUnsteady true;' in "::tracer"
swak4Foam: Allocating new repository for sampledMeshes
Manipulated field tracer in 2268 cells with the expression "0"
--> FOAM Warning : 
    From function simpleFunctionObject::simpleFunctionObject
    in file simpleFunctionObject/simpleFunctionObject.C at line 109
    'outputControlMode' not found in doWithPython
Assuming: timeStep
--> FOAM Warning : 
    From function simpleFunctionObject::simpleFunctionObject
    in file simpleFunctionObject/simpleFunctionObject.C at line 117
    'outputInterval' not found in doWithPython
Assuming: 1
--> FOAM Warning : 
    From function functionObjectListProxy::functionObjectListProxy
    in file functionObjectProxy/functionObjectListProxy/functionObjectListProxy.C at line 98
    For doWithPython the 'readDuringConstruction'-variable  is ignored because this concrete class does not allow  constructing the functionObjects during construction
Time = 0.00119048

MULES: Solving for alpha1
Liquid phase volume fraction = 0  Min(alpha1) = 0  Max(alpha1) = 1
MULES: Solving for alpha1
Liquid phase volume fraction = 0  Min(alpha1) = 0  Max(alpha1) = 1


--> FOAM FATAL ERROR: 
This specialisation is not implemented


    From function ExpressionResult::calcIsSingleValueInternal<bool>()
    in file ExpressionResult/ExpressionResult.C at line 373.

FOAM exiting
Any assistance will be greatly appreciated

Regards
John
Attached Files
File Type: gz log.make.tar.gz (5.6 KB, 0 views)
JFM is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
error message with modeling a cube with a hold at the center hsingtzu OpenFOAM Native Meshers: blockMesh 2 March 14, 2012 10:56
mesh airfoil NACA0012 anand_30 OpenFOAM Meshing & Mesh Conversion 12 December 12, 2011 05:16
BlockMesh FOAM warning gaottino OpenFOAM Native Meshers: blockMesh 7 July 19, 2010 14:11
Axisymmetrical mesh Rasmus Gjesing (Gjesing) OpenFOAM Native Meshers: blockMesh 10 April 2, 2007 14:00
Import gmsh msh to Foam adorean Open Source Meshers: Gmsh, Netgen, CGNS, ... 24 April 27, 2005 08:19


All times are GMT -4. The time now is 11:18.