CFD Online Discussion Forums - [OpenFOAM.org] openfoam 2.4.0 installation

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)

- OpenFOAM Installation (https://www.cfd-online.com/Forums/openfoam-installation/)

- - [OpenFOAM.org] openfoam 2.4.0 installation (https://www.cfd-online.com/Forums/openfoam-installation/178045-openfoam-2-4-0-installation.html)

openfoam 2.4.0 installation

hi friends
i am new user of openfoam. i want to install openfoam 2.4.0 on ubuntu 14.4 . i followed instruction in https://openfoamwiki.net/index.php/I...M-2.4.0/Ubuntu. but it give the attached error log file. could any one help me.

thanks a lot
abdoli

Quick answer: Either you didn't run the complete command that is shown in the wiki page, namely the "2>&1" part might be missing in the command you ran:

Code:

./Allwmake > log.make 2>&1

Or you accidentally hit the key combination Ctrl+C, which aborted the build.

Either way, please run the command above once again.

dear Bruno
thank you for reply. i am installing openfoam 2.4.0 as second foam. i have foam-extend 3.1 now on ubuntu 14.04. i will do your suggestion and inform you. i have another problem with 'wmake' command and install swake4Foam. when i type wmake it gives 'wmake: command not found'. i followed https://openfoamwiki.net/index.php/I...14.04_to_15.10 for installing swake4Foam. but it gives attached error log file. how can i fix it?

thanks a lot
Ali

Quote:

Originally Posted by abdoli (Post 619825)

Quick answer: You forgot to activate the OpenFOAM or foam-extend shell environment. You should either run of240 or fe31 or whichever alias you are using.

For more details, please read: http://openfoamwiki.net/index.php/In...nFOAM_versions

I have moved your two other posts to there: http://www.cfd-online.com/Forums/ope...m-2-4-0-a.html