CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Installation

[foam-extend.org] foam-extend 3.2 on Ubuntu 12.04, Floating point exception for tutorials

Register Blogs Community New Posts Updated Threads Search

Like Tree3Likes
  • 1 Post By wyldckat
  • 1 Post By arsalan.dryi
  • 1 Post By wyldckat

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 10, 2016, 19:26
Default foam-extend 3.2 on Ubuntu 12.04, Floating point exception for tutorials
  #1
Member
 
Arsalan
Join Date: Jul 2014
Posts: 74
Rep Power: 11
arsalan.dryi is on a distinguished road
Dear Foamers,
Recently I've installed foam extend 3.2 on Ubuntu 12.04, a long time installation procedure!
But I get floating point exception (core dumped) when I run tutorial cases in the surfaceTracking folder!
Also I'd installed foam-extend 3.1 a long time ago and I didn't have this problem!
For example, here is the results of hydrofoil tutorial after Allrun executation:

log.makeFaMesh:
Code:
/*---------------------------------------------------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | foam-extend: Open Source CFD                    |
|  \\    /   O peration     | Version:     3.2                                |
|   \\  /    A nd           | Web:         http://www.foam-extend.org         |
|    \\/     M anipulation  | For copyright notice see file Copyright         |
\*---------------------------------------------------------------------------*/
Build    : 3.2-a4e7bf3b15c0
Exec     : makeFaMesh
Date     : Nov 11 2016
Time     : 03:34:02
Host     : arsalan-VPCSE2EFX
PID      : 6655
CtrlDict : "/home/arsalan/foam/arsalan-3.2/run/hydrofoil/system/controlDict"
Case     : /home/arsalan/foam/arsalan-3.2/run/hydrofoil
nProcs   : 1
SigFpe   : Enabling floating point exception trapping (FOAM_SIGFPE).

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 0

Floating point exception (core dumped)
log.interTrackFoam:
Code:
/*---------------------------------------------------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | foam-extend: Open Source CFD                    |
|  \\    /   O peration     | Version:     3.2                                |
|   \\  /    A nd           | Web:         http://www.foam-extend.org         |
|    \\/     M anipulation  | For copyright notice see file Copyright         |
\*---------------------------------------------------------------------------*/
Build    : 3.2-a4e7bf3b15c0
Exec     : interTrackFoam
Date     : Nov 11 2016
Time     : 03:34:02
Host     : arsalan-VPCSE2EFX
PID      : 6657
CtrlDict : "/home/arsalan/foam/arsalan-3.2/run/hydrofoil/system/controlDict"
Case     : /home/arsalan/foam/arsalan-3.2/run/hydrofoil
nProcs   : 1
SigFpe   : Enabling floating point exception trapping (FOAM_SIGFPE).

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create dynamic mesh for time = 0

Selecting dynamicFvMesh dynamicMotionSolverFvMesh
Floating point exception (core dumped)
For more detailed information, here is the result of "ldd $(which interTrackFoam)" command:
Code:
	linux-vdso.so.1 =>  (0x00007ffe944ec000)
	libfreeSurface.so => /home/arsalan/foam/foam-extend-3.2/lib/linux64Gcc49DPOpt/libfreeSurface.so (0x00007fd32c97e000)
	libdynamicFvMesh.so => /home/arsalan/foam/foam-extend-3.2/lib/linux64Gcc49DPOpt/libdynamicFvMesh.so (0x00007fd32c618000)
	libdynamicMesh.so => /home/arsalan/foam/foam-extend-3.2/lib/linux64Gcc49DPOpt/libdynamicMesh.so (0x00007fd32c1e8000)
	libmeshTools.so => /home/arsalan/foam/foam-extend-3.2/lib/linux64Gcc49DPOpt/libmeshTools.so (0x00007fd32bd8f000)
	libfiniteVolume.so => /home/arsalan/foam/foam-extend-3.2/lib/linux64Gcc49DPOpt/libfiniteVolume.so (0x00007fd329e8d000)
	libfiniteArea.so => /home/arsalan/foam/foam-extend-3.2/lib/linux64Gcc49DPOpt/libfiniteArea.so (0x00007fd329837000)
	liblduSolvers.so => /home/arsalan/foam/foam-extend-3.2/lib/linux64Gcc49DPOpt/liblduSolvers.so (0x00007fd3295d3000)
	libmesquite.so.0 => /home/arsalan/foam/foam-extend-3.2/ThirdParty/packages/mesquite-2.1.2/platforms/linux64Gcc49DPOpt/lib/libmesquite.so.0 (0x00007fd32921d000)
	libfoam.so => /home/arsalan/foam/foam-extend-3.2/lib/linux64Gcc49DPOpt/libfoam.so (0x00007fd3284d5000)
	libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007fd3282d1000)
	librt.so.1 => /lib/x86_64-linux-gnu/librt.so.1 (0x00007fd3280c9000)
	libstdc++.so.6 => /home/arsalan/foam/foam-extend-3.2/ThirdParty/packages/gcc-4.9.2/platforms/linux64Gcc49DPOpt/lib64/libstdc++.so.6 (0x00007fd327d9d000)
	libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x00007fd327aa1000)
	libgcc_s.so.1 => /home/arsalan/foam/foam-extend-3.2/ThirdParty/packages/gcc-4.9.2/platforms/linux64Gcc49DPOpt/lib64/libgcc_s.so.1 (0x00007fd32788b000)
	libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007fd3274cd000)
	libtetFiniteElement.so => /home/arsalan/foam/foam-extend-3.2/lib/linux64Gcc49DPOpt/libtetFiniteElement.so (0x00007fd326e92000)
	libtetMotionSolver.so => /home/arsalan/foam/foam-extend-3.2/lib/linux64Gcc49DPOpt/libtetMotionSolver.so (0x00007fd326c28000)
	libdecompositionMethods.so => /home/arsalan/foam/foam-extend-3.2/lib/linux64Gcc49DPOpt/libdecompositionMethods.so (0x00007fd3269fd000)
	libsolidBodyMotion.so => /home/arsalan/foam/foam-extend-3.2/lib/linux64Gcc49DPOpt/libsolidBodyMotion.so (0x00007fd3267bd000)
	libfvMotionSolver.so => /home/arsalan/foam/foam-extend-3.2/lib/linux64Gcc49DPOpt/libfvMotionSolver.so (0x00007fd3263d9000)
	libRBFMotionSolver.so => /home/arsalan/foam/foam-extend-3.2/lib/linux64Gcc49DPOpt/libRBFMotionSolver.so (0x00007fd3261c7000)
	liblagrangian.so => /home/arsalan/foam/foam-extend-3.2/lib/linux64Gcc49DPOpt/liblagrangian.so (0x00007fd325fa6000)
	libmpi.so.1 => /home/arsalan/foam/foam-extend-3.2/ThirdParty/packages/openmpi-1.6.5/platforms/linux64Gcc49DPOpt/lib/libmpi.so.1 (0x00007fd325c06000)
	libz.so.1 => /lib/x86_64-linux-gnu/libz.so.1 (0x00007fd3259ef000)
	/lib64/ld-linux-x86-64.so.2 (0x00007fd32cde1000)
	libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007fd3257d2000)
	libutil.so.1 => /lib/x86_64-linux-gnu/libutil.so.1 (0x00007fd3255cf000)
Also the attachment contains result of "export" command.

Finally, the installation procedure which I've passed is as follows:
1)
Code:
sudo apt-get update
2)
Code:
sudo apt-get install git-core build-essential binutils-dev flex \
bison zlib1g-dev qt4-dev-tools libqt4-dev libncurses5-dev \
libxt-dev rpm mercurial graphviz python python-dev
3)
Code:
cd ~/foam/foam-extend-3.2
 
echo export WM_COMPILER=Gcc49 >> etc/prefs.sh
echo export WM_THIRD_PARTY_USE_GCC_492=1  >> etc/prefs.sh
echo export compilerInstall=FOAM >> etc/prefs.sh
 
source etc/bashrc
4)
Code:
cd ~
mkdir foam
cd foam
git clone git://git.code.sf.net/p/foam-extend/foam-extend-3.2 foam-extend-3.2
5)
Code:
cd ~/foam/foam-extend-3.2
source etc/bashrc
 
echo "alias fe32='source \$HOME/foam/foam-extend-3.2/etc/bashrc'" >> $HOME/.bashrc
6)
Code:
export QT_BIN_DIR=/usr/bin/qmake-qt4
echo "export QT_BIN_DIR=$QT_BIN_DIR" >> etc/prefs.sh
7)
Code:
export CUDA_ARCH=sm_30
echo "export CUDA_ARCH=sm_30" >> etc/prefs.sh
8)
Code:
./Allwmake.firstInstall
Sorry for the long post, but I tried to give a detailed information about my problem for a better solution.

Any help will be appreciated,
Regards,
Arsalan.
Attached Files
File Type: gz log.export.gz (2.7 KB, 4 views)
arsalan.dryi is offline   Reply With Quote

Old   November 13, 2016, 12:52
Default
  #2
Retired Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,974
Blog Entries: 45
Rep Power: 128
wyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to all
Quick answer: This seemed fairly familiar... the following thread accounts something very similar: http://www.cfd-online.com/Forums/ope...u-16-04-a.html

Many thanks for all of the details! Nonetheless, my best guess is that the foam-extend 3.1 was still partially loaded in when you build foam-extend 3.2?
Did you start with a clean shell environment (no OpenFOAM/foam-extend environment loaded in)?

Have you tried the simpler tutorial cases? For example "incompressible/icoFoam/cavity".

In addition, what do the following commands give you when you have foam-extend 3.2 environment loaded?
Code:
gcc --version
g++ --version
And do you really have the CUDA compiler stack installed?
arsalan.dryi likes this.
__________________
wyldckat is online now   Reply With Quote

Old   November 13, 2016, 18:04
Default
  #3
Member
 
Arsalan
Join Date: Jul 2014
Posts: 74
Rep Power: 11
arsalan.dryi is on a distinguished road
Dear Bruno,
Thanks for your replay. About the problem,
Quote:
Originally Posted by wyldckat View Post
Many thanks for all of the details! Nonetheless, my best guess is that the foam-extend 3.1 was still partially loaded in when you build foam-extend 3.2?
Did you start with a clean shell environment (no OpenFOAM/foam-extend environment loaded in)?
Mmm, I don't remember this, usually I use a clean shell environment for new purposes, but I can't say this with certainty.
Quote:
Originally Posted by wyldckat View Post
Have you tried the simpler tutorial cases? For example "incompressible/icoFoam/cavity".
I tried them after your suggestion, some of them works likes:
cavity (icoFoam), damBreak (interFoam), sloshingTank2D (interDyMFoam), sloshing2D and ramp (interTrackFoam)
and some not, for example:
mixerVessel2D (MRFInterFoam), hydrofoil (interTrackFoam), bubble2D (bubbleInterTrackFoam).
Quote:
Originally Posted by wyldckat View Post
In addition, what do the following commands give you when you have foam-extend 3.2 environment loaded?
Code:
gcc --version
g++ --version
Both of them says the same version of 4.9.2 for gcc and g++.

Quote:
Originally Posted by wyldckat View Post
And do you really have the CUDA compiler stack installed?
Nope, just put this step since it's set to optionally in the wiki installation page.

Thanks for your time and helps.
Regards,
Arsalan.
arsalan.dryi is offline   Reply With Quote

Old   November 13, 2016, 18:48
Default
  #4
Retired Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,974
Blog Entries: 45
Rep Power: 128
wyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to all
Hi Arsalan,

It feels like something is missing in your description or maybe I'm not seeing a clue that is already present in the details you've given.

A few more questions:
  1. Did you need to run Allwmake.firstInstall more than once?
  2. How much RAM does your machine have? When in doubt, you can run:
    Code:
    free -h
    • Along with this, how many cores? You can check by running:
      Code:
      lscpu
      E.g. the following lines tells us the main details about core distribution:
      Code:
      CPU(s):                4
On-line CPU(s) list:   0-3
Thread(s) per core:    2
Core(s) per socket:    2
Socket(s):             1
NUMA node(s):          1
  3. When you described the installation steps, did you really do steps #3 and #4 in that order? Or did you do #4 before #3?
  4. Did you notice or have any other problems when trying to build foam-extend 3.2?
I ask these questions, because any of these can have a considerable impact on the resulting build as well, because the system's GCC may have been used to build at least part of foam-extend, which would conflict with the remaining build that was done with GCC 4.9.


Best regards,
Bruno
wyldckat is online now   Reply With Quote

Old   November 14, 2016, 03:05
Default
  #5
Member
 
Arsalan
Join Date: Jul 2014
Posts: 74
Rep Power: 11
arsalan.dryi is on a distinguished road
Hi Bruno,
Many thanks for your fast replay.
Quote:
Originally Posted by wyldckat View Post
Hi Arsalan,
1. Did you need to run Allwmake.firstInstall more than once?
No I ran it only once, maybe I should run it for a second time if helps?
Quote:
2. How much RAM does your machine have? When in doubt, you can run:
Code:
free -h
Actually --h is an invalid option for free in my machine, the results of free --m (m for show output in MB) is as follows:
Code:
             total       used       free     shared    buffers     cached
Mem:          5885       1840       4045          0        120        807
-/+ buffers/cache:        912       4973
Swap:         5243          0       5243
Quote:
Along with this, how many cores? You can check by running:
Code:
lscpu
Well, the output of lscpu is shown below:
Code:
Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                4
On-line CPU(s) list:   0-3
Thread(s) per core:    2
Core(s) per socket:    2
Socket(s):             1
NUMA node(s):          1
Vendor ID:             GenuineIntel
CPU family:            6
Model:                 42
Stepping:              7
CPU MHz:               2801.000
BogoMIPS:              5587.04
Virtualization:        VT-x
L1d cache:             32K
L1i cache:             32K
L2 cache:              256K
L3 cache:              4096K
NUMA node0 CPU(s):     0-3
Quote:
3. When you described the installation steps, did you really do steps #3 and #4 in that order? Or did you do #4 before #3?
4. Did you notice or have any other problems when trying to build foam-extend 3.2?
I did step #3 before step #4, I'm sure about this. And I didn't have other problems at the building procedure.
Anyway, I'm ready for starting a new clean installation if only this could fix the problem.

Thanks in advance.
Regards,
Arsalan.
arsalan.dryi is offline   Reply With Quote

Old   November 14, 2016, 17:16
Default
  #6
Retired Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,974
Blog Entries: 45
Rep Power: 128
wyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to all
Quote:
Originally Posted by arsalan.dryi View Post
I did step #3 before step #4, I'm sure about this. And I didn't have other problems at the building procedure.
Anyway, I'm ready for starting a new clean installation if only this could fix the problem.
Quick answer: I don't see any major limitations regarding RAM and CPU, therefore I'm guessing that the problem was because step #3 was done before #4, which resulted in the problem you're having right now.

I'm sad to say that it does seem to be best that you start over the build from a clean installation. It's safer that way.
wyldckat is online now   Reply With Quote

Old   November 14, 2016, 17:27
Default
  #7
Member
 
Arsalan
Join Date: Jul 2014
Posts: 74
Rep Power: 11
arsalan.dryi is on a distinguished road
Dear Bruno,
Quote:
Originally Posted by wyldckat View Post
Quick answer: I don't see any major limitations regarding RAM and CPU, therefore I'm guessing that the problem was because step #3 was done before #4, which resulted in the problem you're having right now.

I'm sad to say that it does seem to be best that you start over the build from a clean installation. It's safer that way.
Okay, is there anything that I should do for a new clean installation?! Except for starting with a clean shell environment!

Many thanks for your endless helps, it's really warming for us to have you in the forum.
Regards,
Arsalan.
wyldckat likes this.
Last edited by arsalan.dryi; November 14, 2016 at 17:31. Reason: Spelling Issues
arsalan.dryi is offline   Reply With Quote

Old   November 14, 2016, 17:33
Default
  #8
Retired Super Moderator
 
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,974
Blog Entries: 45
Rep Power: 128
wyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to allwyldckat is a name known to all
Quote:
Originally Posted by arsalan.dryi View Post
Okay, is there anything that I should do for a new clean installation?! Except for starting with a clean shell environment!
I wrote about that a few years ago here: http://openfoamwiki.net/index.php/FA...ve_OpenFOAM.3F
arsalan.dryi likes this.
wyldckat is online now   Reply With Quote

Reply

Tags
core dumped, floating point exception, foam-extend, foam-extend-3.2, installation

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[Other] mesh airfoil NACA0012 anand_30 OpenFOAM Meshing & Mesh Conversion 13 March 7, 2022 17:22
problem during mpi in server: expected Scalar, found on line 0 the word 'nan' muth OpenFOAM Running, Solving & CFD 3 August 27, 2018 04:18
[mesh manipulation] RefineMesh Error and Foam warning jiahui_93 OpenFOAM Meshing & Mesh Conversion 4 March 3, 2018 11:32
simpleFoam: floating point exception student666 OpenFOAM Running, Solving & CFD 9 March 13, 2016 18:23
Temperature floating point exception ayckrom FLUENT 1 May 13, 2015 09:02


All times are GMT -4. The time now is 09:16.

Contact Us - CFD Online - Privacy Statement - Top